發布時間：2018-08-18 11:44

【摘要】：面對航天產品的公差分配不合理的問題,提出綜合考慮裝配和制造兩層面的公差分配方案。分析研究對象裝配尺寸鏈的組成環情況,在零件制造的工序級別以制造成本-公差函數和質量損失函數為優化目標,以裝配公差要求、工序間加工余量和工序的加工能力為約束條件,建立公差分配的多目標優化模型。采用基于Pareto機制的帶精英策略的非支配排序遺傳算法求解公差分配優化模型。以某航天企業電液伺服閥產品中銜鐵組件的制造和裝配為例,驗證了模型的適用性和有效性。
[Abstract]:In view of the unreasonable tolerance distribution of spaceflight products, a tolerance distribution scheme considering both assembly and manufacture is proposed. The composition of assembly dimension chain is analyzed. The manufacturing cost tolerance function and mass loss function are taken as the optimization objectives in the process level of parts manufacturing, and the assembly tolerance requirements are taken as the optimization objectives. The multi-objective optimization model of tolerance distribution is established based on the constraints of machining allowance and processing capacity between processes. An undominated sorting genetic algorithm with elite strategy based on Pareto mechanism is used to solve the tolerance allocation optimization model. Taking the manufacture and assembly of the armature assembly in the electro-hydraulic servo valve product of a aerospace enterprise as an example, the applicability and validity of the model are verified.
【作者單位】： 上海交通大學機械與動力工程學院;中國運載火箭技術研究院第十八研究所;
【基金】：火箭產品生產過程一致性量化控制技術研究項目資助項目
【分類號】：TP18;V46

【相似文獻】

相關期刊論文 前1條

1 蔣有年;編制飛機制造用工藝裝備公差分配行業標準的探討[J];航空標準化與質量;1992年04期

，

本文編號：2189364