本文選題：焊接機器人工作站 + 裝填支架��； 參考：《西南交通大學》2017年碩士論文

【摘要】：隨著產品向個性化方向的發展,產品更新、改型的周期加快,自動化專機設備難以適應小批量、多品種的生產要求,因此,搭建一個具有柔性化與智能化的焊接機器人工作站變得十分必要。裝填支架是由多種組件構成的大型結構件,本文針對裝填支架手工焊存在焊接質量難以保證、生產效率低、勞動強度大等問題,并結合其焊接工藝和生產節拍要求以及焊接機器人兼?zhèn)淙嵝曰�、自動化與智能化的特點,提出了基于PLC的焊接機器人工作站方案。為了增加整體柔性,同時為了使焊縫處于合適的焊接位置,設計時還引入了焊接變位機。焊接變位機是機器人工作站的重要輔助設備,也是提高生產效率和焊接質量穩定性的有效方法之一。由于工件在加工、裝配過程中的尺寸誤差和位置偏差以及焊接工件受熱變形等因素的影響引起焊縫偏離示教軌跡,導致焊接缺陷。為了保證焊接質量,需要焊接機器人能夠精確尋位和實時檢測出焊縫偏差,并重新規劃焊接軌跡,因此,焊縫跟蹤技術對機器人的焊接至關重要。以西門子S7-1200型PLC、庫卡機器人設計了焊接機器人工作站的控制系統硬件和軟件,通過西門子觸摸屏完成對機器人相關動作的控制、站內所有設備狀態顯示及報警;調用機器人示教程序,實現對裝填支架的自動焊接。經多次調試表明:焊接機器人工作站各部分技術指標正常,達到了設計要求,可以實現裝填支架高質量、高效率、高精度的焊接。
[Abstract]:With the development of product towards individuation, the cycle of product renewal and modification is quickened, and the equipment of automatic special machine is difficult to adapt to the requirement of small batch and many kinds of production, so, It is necessary to build a flexible and intelligent welding robot workstation. The loading bracket is a large structural part composed of a variety of components. In this paper, the welding quality is difficult to guarantee, the production efficiency is low, the labor intensity is large, and so on. According to the requirements of welding technology and production rhythm, as well as the flexibility, automation and intelligence of welding robot, the workstation scheme of welding robot based on PLC is put forward. In order to increase the overall flexibility and to make the welding seam in a suitable welding position, the welding positioner is also introduced in the design. Welding positioner is an important auxiliary equipment of robot workstation and one of the effective methods to improve production efficiency and welding quality stability. The welding seam deviates from the teaching track due to the influence of the dimension error and position deviation during the machining and assembly process and the thermal deformation of the welded workpiece, which leads to the welding defects. In order to ensure the welding quality, it is necessary for the welding robot to accurately locate the welding seam, detect the welding seam deviation in real time, and replan the welding trajectory. Therefore, the welding seam tracking technology is very important to the robot welding. The control system hardware and software of welding robot workstation are designed with Siemens S7-1200 PLC and Kuka robot. Through Siemens touch screen, the robot is controlled, and all equipments in the station are displayed and alerted. The robot teaching program is called to realize the automatic welding of the loading support. The test results show that the welding robot workstation has normal technical specifications and meets the design requirements. It can realize high quality, high efficiency and high precision welding of the loading support.
【學位授予單位】：西南交通大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP242

【參考文獻】

相關期刊論文 前10條

1 莫金竹;;焊接機器人在機械制造領域中的應用及發展趨勢[J];現代焊接;2016年08期

2 趙文光;李士凱;張斌斌;;焊接機器人智能化技術研究現狀與展望[J];材料開發與應用;2016年03期

3 劉溪;;焊接機器人應用的優勢與劣勢研究[J];農業科技與裝備;2015年12期

4 樂健;張華;葉艷輝;范宇;;基于旋轉電弧傳感機器人立焊焊縫的跟蹤[J];上海交通大學學報;2015年03期

5 李素萍;李永剛;;變位機在機器人焊接工作站中的應用[J];機器人技術與應用;2014年04期

6 員俊峰;姚艷彬;宗光華;;基于PLC的機器人制孔執行器控制系統設計[J];機械設計與制造;2010年07期

7 許燕玲;林濤;陳善本;;焊接機器人應用現狀與研究發展趨勢[J];金屬加工(熱加工);2010年08期

8 畢曉峰;;機器人原理與弧焊機器人示教編程[J];電焊機;2009年04期

9 宋金虎;;我國焊接機器人的應用與研究現狀[J];電焊機;2009年04期

10 張龍華;;焊接機器人在現代工業生產中的應用[J];電焊機;2009年04期

，

本文編號：2084031