本文選題：水蒸氣透過率 + 透濕性�。� 參考：《包裝工程》2017年21期

【摘要】：目的探究改進后的紅外傳感器法設備對包裝材料透濕性測試的影響及應用性能的提升效果。方法改進設備控溫技術及夾樣裝置,保證試驗過程溫度穩定,可同時測試薄膜/片材、容器類試樣,以基礎方法——杯式法設備測試為參考,并分別采用改進前后的紅外傳感器法設備依次測試1.2 mm皮革、25μm PET薄膜、230μm太陽能背板片材、20μm PP薄膜、100μm PET/AI/PA/CPP與12μm VMPET薄膜這6種不同級別透濕性材料,分別在溫度為23℃、相對濕度為90%與溫度為38℃、相對濕度為90%這2種試驗條件下的水蒸氣透過率。結果改進后紅外傳感器法與杯式法設備在試驗時引入的相對不確定度基本相同,與改進前設備相比,改進后紅外傳感器法設備的不確定度、與杯式法測試值間的相對偏差,以及各組數據間相對偏差與相對標準偏差均得到了降低。結論改進后紅外傳感器法設備測試不同性能包裝材料水蒸氣透過率的可靠性、準確性、重復性、穩定性均有提高。
[Abstract]:Objective to explore the effect of the improved infrared sensor equipment on the moisture permeability test of packaging materials. Methods to improve the equipment temperature control technology and sample clamping device, to ensure the stability of the temperature during the test process, and to test the film / sheet materials and container samples at the same time, with the reference of the basic method-cup type equipment test. The modified infrared sensor equipment was used to measure 1.2 mm leather and 25 渭 m PET thin film and 230 渭 m solar energy backboard material respectively. The six kinds of moisture permeable materials of 100 渭 m PET / PA / CPP and 12 渭 m VMPET films were measured at 23 鈩，

本文編號：1987783