本文選題：最大生產率　切入點：約束　出處：《機床與液壓》2017年20期 　論文類型：期刊論文

【摘要】：切削用量的選擇對刀具耐用度、產品的加工效率以及加工質量等都有直接影響。為選取合理的切削用量,以最大生產效率為目標,建立銑削加工優化模型。結合實際加工中不同約束限制,采用改進遺傳算法(Multi-Island GA)對目標函數尋優求解。將優化后的結果與切削用量手冊經驗值相對比,切削用量的選取得到了有效改善,并提高了銑削加工的生產效率,且優化結果驗證了算法的可行性。
[Abstract]:The choice of cutting parameters has a direct effect on tool durability, machining efficiency and machining quality. In order to select reasonable cutting parameters, the maximum production efficiency is the goal. The optimization model of milling machining is established. In combination with different constraints in actual machining, an improved genetic algorithm (GA) is adopted to solve the optimization of the objective function. The optimized results are compared with the experience values of the cutting parameters manual. The selection of cutting parameters is improved effectively and the production efficiency of milling is improved. The optimization results verify the feasibility of the algorithm.
【作者單位】： 西南大學工程技術學院;
【基金】：中央高�；緲I(yè)務費專項資金資助項目(XDJK2016E053)
【分類號】：TG659

【相似文獻】

相關期刊論文 前10條

1 T3敏，

本文編號：1606400