【摘要】：MRS-TEM聯用地下水探測系統是一種綜合了MRS直接地下水探測和TEM間接地下水探測兩種方法的新型地下水探測儀器系統。MRS-TEM聯用地下水探測系統通過將MRS和TEM兩種方法有機的結合起來，使其取長補短，有效地提高了地下水探測的效能。近年來，MRS-TEM聯用儀在探測地下水，預防堤壩滲漏、礦井/隧道災害水源超前探測等方面獲得了廣泛的應用。因此提高儀器的可靠性、穩定性就顯得尤為重要，只有通過標準化的加工、測試才能保證儀器的質量、測量精度、一致性和重復性。 本論文的研究以國家重大科學儀器設備開發和應用專項《災害水源（礦井/隧道）直接探測儀器裝備研制與應用》的重要組成部分MRS-TEM聯用儀為基礎，針對現有測試技術的不足，制定儀器核心模塊的生產質量控制標準、抗振性標準以及儀器的整機測試標準、抗振性標準，并研制出核心模塊、室內整機功能、野外整機功能的標準化測試裝置及制定了振動、溫濕度測試方案。只有功能實現和性能指標達到要求的模塊才能用于整機總裝，只有功能實現和性能指標達到要求的儀器才能用于野外探測。模塊的測試裝置對模塊進行全面系統的測試，保證了儀器組裝前核心模塊的穩定性與一致性；室內整機測試平臺提供了一種模擬野外真實工作環境的測試方法，，檢測儀器能否正常工作，保證儀器野外工作前功能和性能指標達到要求；同時分別提供了能夠用于模塊、整機溫濕度和振動測試的標準化設備，進一步提高了儀器的穩定性及可靠性；最后應用便攜式整機測試裝置，為儀器在野外工作中遇到的突發狀況提供了解決方案。 MRS-TEM聯用儀從其核心模塊生產過程的標準化到整機室內測試的標準化，提高了儀器的質量，為聯用儀工程化奠定堅實的基礎；野外測試的標準化提高了聯用儀野外探測實驗的工作效率，降低了工程成本。大量的測試實驗及工程應用證明了本文的研究達到了預期效果。
[Abstract]:The MRS-TEM combined groundwater detection system is a new type of groundwater detection instrument system which integrates MRS direct groundwater detection and TEM indirect groundwater detection. MRS-TEM combined groundwater detection system by combining MRS and TEM The two methods combine organically. It can improve the effectiveness of groundwater detection. In recent years, MRS-TEM combined instrument has been widely used in detecting underground water, preventing dike leakage and detecting mine / tunnel disaster water sources ahead of time. Therefore, it is very important to improve the reliability and stability of the instrument. Only through standardized processing can the quality, accuracy, consistency and repeatability of the instrument be guaranteed. The research of this paper is based on the important component of MRS-TEM combined instrument, which is the development and application of national major scientific instruments and equipments, which is called "Development and Application of Direct detecting Instruments and equipment for disaster Water Source (Mine / Tunnel)". Aiming at the deficiency of the existing testing technology, the production quality control standard, the anti-vibration standard, the whole machine test standard and the anti-vibration standard of the instrument core module are formulated, and the core module and the function of the indoor whole machine are developed. Field function of the standardized testing device and the development of vibration, temperature and humidity test program. Only the modules of function realization and performance index can be used in the assembly of the whole machine, and only the instruments with function realization and performance index can be used in field detection. The testing device of the module carries on the comprehensive and systematic test to the module, which ensures the stability and consistency of the core module before the instrument assembly. The indoor testing platform provides a test method to simulate the real working environment in the field. The test instrument can work normally to ensure that the function and performance of the instrument can meet the requirements before the field work. At the same time, the standardized equipment which can be used for module, whole machine temperature, humidity and vibration testing is provided, which further improves the stability and reliability of the instrument. Finally, the portable testing device is used to provide a solution for the unexpected situation of the instrument in the field work. From the standardization of the production process of its core module to the standardization of indoor testing of the whole machine, the MRS-TEM instrument improves the quality of the instrument and lays a solid foundation for the engineering of the instrument. The standardization of field test improves the efficiency of field test and reduces the engineering cost. A large number of test experiments and engineering applications have proved that the research in this paper has achieved the desired results.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TH763.1

【參考文獻】

相關期刊論文 前10條

1 習曉紅;段清明;林君;尚新磊;;核磁共振信號頻率測量系統的設計與實現[J];吉林大學學報(信息科學版);2008年05期

2 李振宇,高秀花,潘玉玲;核磁共振測深方法的新進展[J];CT理論與應用研究;2004年02期

3 程邈;李振宇;王鵬;;用SNMR和TEM方法探測地下水的研究與實踐[J];CT理論與應用研究;2006年02期

4 潘玉玲,Jean BERNARD,李振宇,熊玉珍,甘濤;輕便新型核磁共振找水儀及其在堤壩監測中的應用[J];大壩與安全;2004年01期

5 張保祥,劉春華;瞬變電磁法在地下水勘查中的應用綜述[J];地球物理學進展;2004年03期

6 林君;;核磁共振找水技術的研究現狀與發展趨勢[J];地球物理學進展;2010年02期

7 尹成勇,潘玉玲;核磁共振技術在找水中的應用[J];地下水;1996年04期

8 許小強;程順有;;地球物理找水方法概述[J];地下水;2007年03期

9 林君;現代地球物理儀器的開發與應用[J];地質裝備;2004年02期

10 唐新功,胡文寶,嚴良俊;瞬變電磁法找水研究[J];工程地球物理學報;2005年03期

相關博士學位論文 前2條

1 榮亮亮;核磁共振多匝線圈找水技術研究[D];吉林大學;2009年

2 尚新磊;TEM-MRS聯用地下水探測關鍵技術研究[D];吉林大學;2010年

本文編號：2423759