本文關鍵詞：多工況滾子摩擦副彈流潤滑實驗裝置的設計　出處：《潤滑與密封》2016年04期 　論文類型：期刊論文

  更多相關文章： 彈流潤滑 線接觸 多工況實驗 凹陷

【摘要】：為了更好地觀測滾子摩擦副在不同卷吸速度下的彈流潤滑現象,開展有限長線接觸彈流潤滑油膜成膜機制的實驗研究,對原有的線接觸光干涉實驗裝置進行改進,將原有的曲柄滑塊機構設計成絲杠推桿,從而將旋轉運動轉變成直線運動。實驗表明:改進后的實驗裝置可以有效地實現滾子卷吸運動速度大小和運動規律的變化,可以觀測到非常清晰的油膜干涉圖像,在滾子接觸區域油膜呈現出較為明顯的彈流特征,可為線接觸彈流的理論研究提供可靠的實驗數據。在改進后的實驗裝置上,對滾子在突然加速的工況下進行了實驗研究,由于步進電機的特點,在突然加速的瞬間有極短的停頓,導致擠壓效應較為明顯,油膜被封在滾子的接觸區域內形成凹陷,出現封油現象,當滾子卷吸速度增加時,油膜厚度也會隨之增加。
[Abstract]:In order to better observe the elastohydrodynamic lubrication of roller friction pairs at different entrainment speeds, the film forming mechanism of finite line contact elastohydrodynamic lubricating oil film was studied experimentally. The original experimental device of linear contact light interference is improved, and the original crank slider mechanism is designed as a lead screw push rod. The experimental results show that the improved device can effectively change the speed and law of roller entrainment motion. A very clear image of oil film interference can be observed, and the oil film in the roller contact area shows obvious elastohydrodynamic characteristics. It can provide reliable experimental data for the theoretical study of linear contact elastohydrodynamic. In the improved experimental device, the roller is studied under the condition of sudden acceleration, because of the characteristics of stepping motor. At the moment of sudden acceleration, there is a very short pause, which leads to the obvious extrusion effect. The oil film is sealed in the contact area of the roller to form a depression, and the oil sealing phenomenon occurs, when the roller entrainment speed increases. The thickness of the oil film will also increase.
【作者單位】： 常州大學機械工程學院;
【基金】：江蘇省自然科學基金項目(BK2011238) 國家“十二五”重點科研項目(XXXT-125-GH-148) 江蘇省前瞻性科技聯合研究項目(BY2015027-09)
【分類號】：TH87
【正文快照】： )j縥縥縥縥縥縥縥，

本文編號：1431909