【摘要】：插值法是離散頻譜校正分析中應用最為廣泛、研究最為深入、算法種類最多的一種校正方法,按照采用的譜線類型又可以分為基于幅值譜比值和基于復數譜比值的兩種插值法。在實際工程應用中,抗噪聲性能是評價一種算法最為重要的指標之一。在回顧國內外插值校正算法的理論研究和發展現狀的基礎上,簡要介紹了各種插值算法的原理和特點。通過仿真考察了各算法的抗噪聲性能,重點分析了插值極性錯誤對目前各種算法的影響。通過分析比較,指出了現有插值法的不足之處和亟待解決的問題,對插值校正算法的發展進行了展望和探討。
[Abstract]:Interpolation is one of the most widely used, deeply researched and widely used methods in discrete spectrum correction analysis. According to the spectral line types, it can be divided into two kinds of interpolation methods based on amplitude spectrum ratio and complex spectral ratio. In practical engineering application, the anti-noise performance is one of the most important indexes to evaluate an algorithm. On the basis of reviewing the theoretical research and development status of interpolation correction algorithms at home and abroad, the principle and characteristics of various interpolation algorithms are briefly introduced. The anti-noise performance of the algorithms is investigated by simulation, and the influence of interpolation polarity errors on the current algorithms is analyzed. Through analysis and comparison, this paper points out the shortcomings of the existing interpolation methods and the problems to be solved urgently, and prospects and discusses the development of the interpolation correction algorithms.
【作者單位】： 重慶郵電大學先進制造工程學院;重慶機床(集團)有限責任公司;重慶理工大學汽車工程學院;
【基金】：重慶市基礎科學與前沿技術研究專項資助(CSTC2015JCYJA70004) 重慶市教委科學技術研究項目資助(KJ1600430) 重慶市杰出青年科學基金項目資助(CSTC2014JCYJJQ70001)~~
【分類號】：TN911.7

【相似文獻】

相關期刊論文 前3條

1 溫佳;張興敢;;自適應RGB插值對多普勒雷達成像的優化[J];航空兵器;2008年04期

2 唐曉斐;申濤;劉曉璞;;基于內插值法的磨音信號處理[J];濟南大學學報(自然科學版);2013年03期

3 王玉詔;張寅超;陳思穎;邱宗甲;趙培濤;;用于激光雷達回波平滑的半步長插值迭代法[J];北京理工大學學報;2011年12期

，

本文編號：2400606