本文選題：無線通信 + ZigBee　； 參考：《華北電力大學(北京)》2016年碩士論文

【摘要】：基于工業控制網絡的發展方向以及ZigBee網絡的優勢,將工業控制中的傳感器數據通過ZigBee網絡與控制計算機進行通訊,會節省大量現場布線的人工、時間及物料成本；同時,基于ZigBee網絡傳輸?shù)男盘?hào),其誤差也將小于有線通訊的線損誤差。因此,研究將ZigBee網絡應用于工業自動化控制系統具有理論意義及較強的使用價值。本文進行基于ZigBee的工業自動化控制系統數據通訊的研究,在深入分析研究ZigBee協議的基礎上,結合工業控制系統的特點,完成了系統數據通訊總體方案設計；實現了基于ZigBee的通信模塊的硬件設計和軟件設計,并分析硬件電路的正確性與合理性,及驗證了通訊的可行性；最后對數據通訊系統進行了測試和結果分析。測試結果表明,整個系統能夠較為快速的建立網絡,傳感器節點、路由器節點及協調器節點能夠穩定運行,并且數據傳輸丟包率很低,能夠保證數據的準確性。
[Abstract]:Based on the development direction of industrial control network and the advantages of ZigBee network, the communication between the sensor data in industrial control through ZigBee network and control computer will save a lot of manual, time and material cost of field wiring. At the same time, the error of the signal transmitted by ZigBee network will be less than the line loss error of wired communication. Therefore, it is of theoretical significance and strong use value to apply ZigBee network to industrial automation control system. In this paper, the data communication of industrial automation control system based on ZigBee is studied. Based on the in-depth analysis of the ZigBee protocol and the characteristics of industrial control system, the system data communication is completed. The hardware design and software design of the communication module based on ZigBee are realized, the correctness and rationality of the hardware circuit are analyzed, and the feasibility of the communication is verified. Finally, the data communication system is tested and the results are analyzed. The test results show that the whole system can establish network, sensor node quickly. The router node and coordinator node can operate stably, and the packet loss rate of data transmission is very low, which ensures the accuracy of data.
【學位授予單位】：華北電力大學(北京)
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP273;TN92

【參考文獻】

相關期刊論文 前8條

1 蒲曉蕊;;基于ZigBee技術的草地環境信息監測系統設計[J];農業網絡信息;2014年04期

2 王玲;鄒小昱;劉思瑤;沈明霞;朱宏超;朱昒杰;;基于RFID與ZigBee的羊場養殖信息管理系統[J];農業機械學報;2014年09期

3 頓文濤;盧高飛;左秀生;趙玉成;李子山;袁超;馬斌強;;無線傳感器網絡在遠程醫療監護系統中的應用[J];農業網絡信息;2014年02期

4 于海業;羅瀚;任順;隋媛媛;;ZigBee技術在精準農業上的應用進展與展望[J];農機化研究;2012年08期

5 岳青;張海輝;盧博友;;基于WSN的溫室環境監測節點設計[J];安徽農業科學;2010年30期

6 郭謀發;楊振中;楊耿杰;黃世遠;;基于ZigBee Pro技術的配電線路無線網絡化監控系統[J];電力自動化設備;2010年09期

7 牛星震;;無線傳感網在嵌入式數字視頻檢測監控系統中的應用研究[J];電腦與電信;2010年05期

8 何飛舟;楊鐵夫;劉橋;;基于ZigBee的無線傳感器網絡及其在交通信息領域中的應用[J];無線互聯科技;2010年04期

，

本文編號：2102476