發布時間：2018-06-21 06:08

  本文選題：光纖陀螺 + 標度因數模型��； 參考：《中國慣性技術學報》2017年04期

【摘要】：高精度慣性導航系統對由溫度引起的光纖陀螺標度因數變化指標提出了很高的要求。采用溫度補償技術是一種提升標度因數性能的有效方法,其中建立精確且普適的溫度模型是關鍵。提出并分析了光纖陀螺溫度與標度因數模型的遲滯現象。通過分析和試驗表明,標度因數模型的遲滯現象是由光纖陀螺結構的熱不均勻性造成的,采用多溫度點采樣來修正標度因數模型的方法可以有效避免模型的遲滯現象,提升標度因數模型的補償效果,使光纖陀螺可以適應各種溫度變化的環境。在-40℃~+60℃范圍內同時對光纖環圈和光源的溫度進行采集,并利用光源溫度與平均波長的關系來修正標度因數模型,通過模型修正可以將光纖陀螺全溫標度因數穩定性指標由常規模型下的36×10~( 6)提升到12×10~( 6)。
[Abstract]:The high precision inertial navigation system has put forward the very high request to the change index of scale factor of fog caused by temperature. Temperature compensation is an effective method to improve the performance of scale factor, and the key is to establish an accurate and universal temperature model. The hysteresis phenomenon of fog temperature and scale factor model is proposed and analyzed. The results of analysis and experiment show that the hysteresis of scale factor model is caused by the thermal inhomogeneity of fiber optic gyroscope, and the hysteresis of the model can be effectively avoided by adopting multi-temperature sampling to modify the scale factor model. The compensation effect of scale factor model is improved so that fiber optic gyroscope can adapt to various temperature variation environment. In the range of -40 鈩，

本文編號：2047533