本文選題：波導 + 圓極化器��； 參考：《南京郵電大學》2017年碩士論文

【摘要】：波導圓極化器是天線饋源系統中的重要組成部分,在反射面天線饋源系統中應用最為廣泛。它的功能是實現線極化信號和圓極化信號之間的相互轉換,其性能的好壞直接決定著整個饋源系統的優劣。本文的主要研究內容是隔板型圓極化器,它是一種可以實現左旋和右旋圓極化同時工作的微波器件。主要研究工作如下:1.波導圓極化器的分析和總結。通過深入學習有關波導圓極化器的文獻,對其進行了歸納和總結,分析了各種類型的圓極化器的優勢和缺點,重點分析了隔板型圓極化器。2.傳統隔板型圓極化器的改進設計。傳統的隔板型圓極化器具有結構緊促、易于加工等特點,但其相對工作帶寬一般只能做到25%左右。本文對傳統的隔板型圓極化器進行深入的研究和分析后,重新優化設計了階梯隔板,最后設計了一款寬頻帶的改進型隔板圓極化器,其相對工作帶寬達到了37%。3.新型波導圓極化器的研究和設計。通過深入學習和分析波導圓極化器,并結合正交模耦合器OMT(Ortho-Mode Transducer)方面的一些知識,提出了一種與傳統隔板型圓極化器工作原理不同的新型波導圓極化器。同時,設計了一款工作在X波導的新型波導圓極化器,并設計了易于加工測試的實物加工結構。最后,通過對仿真結果和實物測試結果進行對比,驗證了該新型波導圓極化器的正確性。雖然本文給出的新型波導圓極化器的相對工作帶寬只有10%,但是相對于傳統的隔板型圓極化器,它的結構設計及工作原理不同,因此有許多可以被研究和改進的地方。
[Abstract]:The waveguide circular polarizer is an important part of the antenna feed system. It is used most widely in the reflector antenna feed system. Its function is to realize the mutual conversion between the linear polarization signal and the circular polarization signal. The performance of the waveguide circular polarizer directly determines the quality and inferior of the whole feed system. The main research content of this paper is the baffle type round pole. The main research work is as follows: the analysis and summary of the 1. waveguide circular polarizers. Through the in-depth study of the literature about the waveguide circular polarizer, it has been summarized and summarized, the advantages and disadvantages of various types of circular polarizers are analyzed, and the emphasis is given to the analysis of the advantages and disadvantages of the circular polarizers. The improvement design of the traditional partition circular polarizer of the partition circular polarizer.2. is designed. The traditional partition circular polarizer has the characteristics of tight structure and easy processing, but the relative working bandwidth can only be about 25%. After deep research and analysis of the traditional baffle circular polarizer, this paper re optimizes the design of the staircase partition board. Finally, a wide-band improved diaphragm circular polarizer is designed. Its relative working bandwidth reaches the research and design of a new type of 37%.3. waveguide circular polarizer. By studying and analyzing the waveguide circular polarizer and combining some knowledge of the orthogonal mode coupler OMT (Ortho-Mode Transducer), a kind of circular plate circle is proposed. A new waveguide circular polarizer with different polarizers working principle is designed. A new waveguide circular polarizer working in the X waveguide is designed and the machining structure is designed to be easily machined. Finally, the correctness of the new waveguide circular polarizer is verified by comparing the simulation results with the physical test results. The relative working bandwidth of the new waveguide circular polarizer is only 10%, but relative to the traditional diaphragm type circular polarizer, its structure design and working principle are different, so there are many places that can be studied and improved.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN820

【參考文獻】

相關期刊論文 前3條

1 辛麗;萬繼響;;C頻段隔板式圓極化器的優化設計和容差分析[J];微波學報;2012年S2期

2 張成全;曹燕華;;寬帶式隔板極化器[J];現代電子技術;2007年12期

3 徐繼東;隔片圓極化器的設計及S參數的分析[J];現代雷達;2005年08期

相關碩士學位論文 前1條

1 劉蕊花;圓極化器技術的研究[D];西安電子科技大學;2010年

，

本文編號：2019444