本文選題：扎紗機 + 自動平衡��； 參考：《機械設計與制造》2017年08期

【摘要】：裝載紗團的光纜扎紗機在運轉時,由于不平衡量較大會引起強烈振動,影響扎紗機的穩定運行。實際運行中,紗團是不平衡量的主要來源,并受到空間的限制,為此選擇球式自動平衡裝置對其進行減振。利用傳遞矩陣法對紗團轉子系統進行分析,并對自動平衡裝置原理數值分析;將轉子系統和自動平衡裝置的計算模型融合,編制自動平衡裝置紗團系統的MATLAB數值仿真程序。將已知不平衡量設置在不同位置,比較自動平衡裝置的平衡效果。利用有限元法模擬不平衡量在不同位置時的轉子系統穩態響應。有限元模型及數值仿真驗證結果均表明利用自動平衡裝置可以達到有效減振的效果。
[Abstract]:During the operation of the optical cable binding machine loaded with the yarn ball, the strong vibration will be caused by the large unbalance, which will affect the stable operation of the yarn binding machine. In actual operation, the yarn ball is the main source of unbalance and is limited by space. Therefore, the ball automatic balancing device is chosen to reduce the vibration. The transfer matrix method is used to analyze the yarn ball rotor system, and the principle of the automatic balancing device is numerically analyzed, and the calculation model of the rotor system and the automatic balancing device is combined to compile the MATLAB numerical simulation program of the yarn ball system of the automatic balancing device. The known unbalance is set in different positions to compare the balance effect of the automatic balancing device. Finite element method is used to simulate the steady-state response of rotor system at different positions. The results of finite element model and numerical simulation show that the automatic balancing device can effectively reduce vibration.
【作者單位】： 上海交通大學機械與動力工程學院;
【分類號】：TN818

【相似文獻】

相關碩士學位論文 前1條

1 牟玉U，

本文編號：2017755