基于參考信號的無源互調故障定位技術
發布時間:2018-06-14 08:50
本文選題:無源互調 + 故障定位 ; 參考:《電子學報》2017年04期
【摘要】:研究了一種基于參考信號的無源互調故障定位技術.該技術比傳統無源互調測量技術多了一個參考信道,提供參考信號,解調互調信號相位響應,同時引入校準技術,在測量端口構建參考平面,通過頻時轉換得到相對于參考平面的時域響應,有效地進行故障排查.在此基礎上,仿真故障定位實驗驗證了理論的正確性,設計并制造相位參考板,測試結果與實際值比較表明:電纜上兩個故障位置實際值與測量值之差的絕對值均≤1m,實際相對誤差分別約為5.1%、2.4%,證明了這種方法的正確性和可行性.該技術將克服傳統故障定位的不足,更適應于惡劣的地域環境.
[Abstract]:This paper studies a passive intermodulation fault location technology based on the reference signal , which provides a reference channel for the traditional passive intermodulation measurement technology , provides a reference signal , demodulates the phase response of the intermodulation signal , and simultaneously introduces a calibration technique . The simulation fault location experiment verifies the correctness of the theory , and the actual relative error is about 5.1 % and 2.4 % respectively . The technique will overcome the shortage of traditional fault location and adapt to the harsh regional environment .
【作者單位】: 中北大學儀器與電子學院;中國電子科技集團公司第四十一研究所;
【基金】:國家重點實驗室基金(No.9140C120102130C12049)
【分類號】:TN911.7
【相似文獻】
相關期刊論文 前10條
1 楊帆,楊振江,劉康平;故障定位及告警相關處理[J];微機發展;2000年02期
2 宋繼恩;夏蕓;李新;張引;黃善國;趙永利;張杰;;模糊聚類分析在光網絡多故障定位中的應用[J];光通信研究;2013年04期
3 王健全;李崢;沈文粹;顧畹儀;;傳輸網絡的分層故障定位法[J];光通信研究;2006年01期
4 崔賀;田軍;;多粒度光網絡故障定位[J];通信技術;2011年04期
5 張成;廖建新;朱曉民;;一種基于增量貝葉斯疑似度的事件驅動故障定位算法[J];電子與信息學報;2009年06期
6 周厚清;張杰;桂p,
本文編號:2016806
本文鏈接:http://sikaile.net/kejilunwen/xinxigongchenglunwen/2016806.html
最近更新
教材專著