本文選題：Zig + Bee�。� 參考：《現代電子技術》2017年05期

【摘要】：針對電源監控功耗過大,精度不高的問題,提出一種基于ZigBee的電源監控系統設計方法。首先進行電源監控系統的整體結構設計,設計主控芯片及外圍電路;然后進行電源監控系統的硬件模塊化設計,主要包括傳感器模塊、ZigBee核心控制模塊、主控電路、復位電路、同步時鐘設計和信號調理電路設計等。采用ARM Cortex-M0處理器內核實現電源監控系統集成設計;最后進行系統的電路調試測試分析,測試結果表明,采用該設計系統具有較高的電源監控調理性能,功耗較小,輸出功率增益較大,具有較高的控制品質。
[Abstract]:A design method of power monitoring system based on ZigBee is proposed to solve the problem of high power consumption and low precision. Firstly, the whole structure of the power supply monitoring system is designed, the main control chip and the peripheral circuit are designed, then the hardware modularization design of the power supply monitoring system is carried out, including the sensor module ZigBee core control module, the main control circuit, the reset circuit. Synchronous clock design and signal conditioning circuit design. The ARM Cortex-M0 processor kernel is used to realize the integrated design of the power supply monitoring system. Finally, the circuit debugging and testing analysis of the system is carried out. The test results show that the design system has high power monitoring and conditioning performance and low power consumption. The output power gain is large and has high control quality.
【作者單位】： 西南交通大學信息科學與技術學院;四川建筑職業技術學院電氣工程系;
【分類號】：TP277;TN92

【參考文獻】

相關期刊論文 前7條

1 陸興華;吳恩q，

本文編號：1936694