本文關鍵詞：基于Marx發生器的快速Q(mào)開關驅動電路設計　出處：《紅外與激光工程》2017年09期 　論文類型：期刊論文

  更多相關文章： 調Q Marx發生器 功率MOS管 高壓脈沖

【摘要】：針對電光Q開關要求速度快的特點,提出基于Marx發生器的高壓快速調Q驅動電路的設計方法。利用高壓模塊產生一級高壓為并聯電容充電,采用變壓器隔離驅動8路MOS管。當觸發信號引入時,功率MOS管導通使電容串聯同時放電,從而電壓倍增獲得快速的高壓脈沖。實驗結果表明:通過該方法獲得了上升沿12 ns,幅值3 000~4 000 V數字可調的高壓脈沖波形。相比于傳統脈沖變壓器法的波形,上升時間減小了近35 ns。此調Q電路已應用于激光二極管(LD)泵浦的固體Nd:YAG激光器中,且長期穩定工作。
[Abstract]:In view of the high speed of electro-optic Q switch, a design method of high voltage fast Q switch drive circuit based on Marx generator is put forward. The high voltage module is used to generate one stage high voltage to charge the shunt capacitor. Eight MOS transistors are driven by transformer isolation. When the trigger signal is introduced, the power MOS transistors can discharge the capacitors in series at the same time. A fast high voltage pulse is obtained by voltage doubling. The experimental results show that the rising edge is 12 ns by this method. A digitally adjustable high voltage pulse waveform with a amplitude of 3 000 ~ 4 000 V compared with that of the conventional pulse transformer method. The rise time is reduced by about 35ns. The Q-switched circuit has been applied to the solid-state Nd:YAG laser pumped by laser diode (LD) and has been working stably for a long time.
【作者單位】： 北京空間機電研究所;
【分類號】：TN24
【正文快照】： 0引言采用電光調Q技術可有效提高激光脈沖峰值功率并壓縮脈寬[1-4],而Q開關速度是影響激光器電光效率的一個重要因素,因此如何設計調Q驅動電路提高Q開關速度一直備受關注[5-9]。常用的電光調Q脈沖產生方法有三種[4,8]:脈沖變壓器法、高頻金屬陶瓷三極管法和雪崩三極管法。脈沖，

本文編號：1427975