發布時間：2018-04-22 03:16

  本文選題：時延估計 + 線性調頻Z變換�。� 參考：《信號處理》2014年10期

【摘要】：時延估計作為一種目標定位技術廣泛應用于各種領域,而其估計精度卻會受到各種因素的影響,使得定位的準確度受限。因此,本文主要針對采樣率受限和噪聲影響等問題,提出了一種高精度的時延估計方法。它以相關峰精確插值法為基礎,利用二次相關和希爾伯特差值進行改進。仿真結果表明,該法不僅可以在已有采樣率的基礎上提高相關函數的分辨率,而且還具有較強的抗噪聲性能和峰值檢測能力。它在高信噪比環境下可以得到相當精確的時延值,在低信噪比環境下時延估計性能改善顯著。因此,本文所提的算法是一種能精確進行時延估計的有效方法。
[Abstract]:As a kind of target location technology, time delay estimation is widely used in various fields, but its estimation accuracy will be affected by various factors, so the accuracy of location is limited. Therefore, a high precision time delay estimation method is proposed to solve the problem of sampling rate limitation and noise effect. It is improved by quadratic correlation and Hilbert difference based on the exact interpolation method of correlation peak. The simulation results show that this method can not only improve the resolution of correlation function on the basis of the existing sampling rate, but also have strong anti-noise performance and peak detection ability. It can obtain quite accurate delay value in high signal-to-noise ratio (SNR) environment, and improve the performance of delay estimation in low signal-to-noise ratio (SNR) environment. Therefore, the proposed algorithm is an effective method for accurate time delay estimation.
【作者單位】： 燕山大學信息科學與工程學院;
【分類號】：TN911.7
，

本文編號：1785355