本文選題：視頻監控系統　切入點：測試　出處：《電子科技大學》2014年碩士論文

【摘要】：作為智能電網的關鍵組成部分,電網視頻監控系統在電網的生產、運行、維護、管理等方面舉足輕重。近年來,隨著電網視頻監控系統規模的不斷擴大,采用設備的廠家不斷增多,但是由于不同生產廠商的視頻監控系統設備的參考標準、功能及兼容性不一致,不同的產品之間在互聯互通方面存在著一定的障礙。隨著國網公司智能電網建設對電網視頻監控系統標準化管理、統一監控、全局規劃等要求的提出,對電網視頻監控系統進行標準化規定與測試勢在必行。本文在對四川電網視頻監控系統架構、組成及功能深入調研分析后,結合國網視頻監控系統標準,參與制定并完善了適用于四川的電網視頻監控系統標準。據此進行需求分析,形成了四川電網視頻監控系統檢測平臺的整體結構和功能組成。設計章節主要對檢測平臺(包括A接口平臺模擬器、地市(縣)級平臺模擬器、站端智能輔助平臺模擬器、視頻處理單元模擬器)的各功能模塊進行詳細的分析、設計與實現。主要有:通信功能的實現,SIP協議和HTTP協議棧的實現,基于RTP的H.264格式視頻流數據的打包、傳輸、解碼播放、校驗和保存的實現,MD5加密過程的實現等。在設計完成檢測平臺功能測試和協議測試的基礎上,本文進一步對其功能進行優化,提出了自動測試、異常測試和壓力測試的思想,對這三種測試方法進行研究,分析選取典型測試案例,同時進行設計與實現。檢測平臺設計完成后,在實驗室和變電站現場與不同廠家的電網視頻監控系統設備進行了大量的聯調測試。在文章最后,給出了具體的測試結果,并對測試情況進行詳細說明。實際測試驗證了該檢測平臺的穩定性、可靠性、準確性、實用性,具有很好的應用價值。
[Abstract]:As a key component of smart grid, the video surveillance system plays an important role in the production, operation, maintenance and management of power grid. The number of manufacturers adopting equipment is increasing, but the reference standards, functions and compatibility of video surveillance system equipment of different manufacturers are not consistent. There are some obstacles in interconnection between different products. With the national network company smart grid construction of the grid video surveillance system standardization management, unified monitoring, global planning and other requirements, It is imperative to standardize and test the video surveillance system of power grid. After deeply investigating and analyzing the structure, composition and function of the video surveillance system of Sichuan Power Grid, this paper combines with the national network video surveillance system standard. Participated in the development and improvement of the standard of power grid video surveillance system for Sichuan. The whole structure and function composition of the video surveillance system detection platform of Sichuan power network is formed. The design chapter mainly discusses the detection platform (including A interface platform simulator, prefectural (county) level platform simulator, station terminal intelligent auxiliary platform simulator, etc. The function modules of the video processing unit simulator are analyzed, designed and implemented in detail, including the implementation of the communication function and the implementation of the HTTP protocol stack, the packaging, transmission, decoding and playing of video stream data in H.264 format based on RTP. On the basis of designing and completing the function test and protocol test of the testing platform, this paper further optimizes its function, and puts forward the ideas of automatic test, abnormal test and stress test. The three testing methods are studied, the typical test cases are analyzed and selected, and the design and implementation of the test platform are carried out. After the design of the test platform is completed, In the laboratory and substation field with different manufacturers of power grid video surveillance system equipment for a large number of joint testing. In the end of the article, the specific test results are given. The test results show that the platform is stable, reliable, accurate and practical.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM76;TN948.6

【參考文獻】

相關期刊論文 前2條

1 崔燕明;劉孝先;馬超;陳建寧;;電網視頻監控系統及接口技術標準[J];電力系統自動化;2010年20期

2 李校林;劉利權;張杰;;基于RTP的H.264視頻流實時打包傳輸?shù)难芯縖J];計算機工程與科學;2012年05期

相關碩士學位論文 前1條

1 李烏江;RTP在遠程視頻傳輸中的應用研究[D];哈爾濱工程大學;2008年

，

本文編號：1666999