【摘要】：為評價某調蓄水庫工程水工建筑物規劃設計的合理性,從改善進口流態消除進氣漩渦的角度出發,采用水工模型試驗方法,分析了工程底孔進水口漩渦形成的原因,進而提出了布設消渦梁和加高上游擋墻高程兩種消渦措施,并通過模型試驗比較驗證,從結構簡單、便于管理、經濟實用方面考慮,推薦加高上游擋墻高程到臨界淹沒水位620 m為底孔消渦措施。
[Abstract]:In order to evaluate the rationality of the planning and design of a hydraulic structure in a reservoir regulation and storage project, from the point of view of improving the inlet flow pattern and eliminating the intake vortex, the causes of the formation of the swirl at the inlet of the bottom hole of the project are analyzed by using the hydraulic model test method. Furthermore, two kinds of vortex elimination measures are put forward, which are the arrangement of vortex elimination beam and the elevation of upstream retaining wall. Through the comparison of model test, it is considered from the aspects of simple structure, convenient management, economy and practice. It is recommended that raising the height of upstream retaining wall to critical inundation water level of 620m is a measure to eliminate vortex in bottom hole.
【作者單位】： 黃河水利職業技術學院;華中科技大學新聞與信息傳播學院;
【基金】：河南省教育廳科學技術研究重點項目(15B570002)
【分類號】：TV135.2;TV652
，

本文編號：2486502