【摘要】：三向測縫計在混凝土面板堆石壩周邊縫監測中廣泛應用,為優化其設備選型,避免安裝缺陷,以3DM型柔性鋼絲位移計整體式三向測縫計、剛性拉桿位移計整體式三向測縫計、剛性拉桿位移計分體式三向測縫計為例,分析了3DM型三向測縫計在設備選型、安裝要點及監測成果分析等方面的優勢。結果表明,3DM型柔性鋼絲位移計整體式三向測縫計工作原理及計算公式科學合理,相比分體式等其他類型三向測縫計具有量程大、安裝方便、測量精度高、耐水壓級別高等優勢。在工程實施中,應注意控制好安裝過程中的重要環節,避免各項安裝缺陷。工程實踐證明,通過對3DM型柔性鋼絲位移計整體式三向測縫計的監測結果進行科學合理地分析處理,可以正確反映大壩周邊縫的變化情況,為大壩的安全評價提供科學合理的評判依據。
[Abstract]:In order to optimize the equipment selection and avoid installation defects, the 3DM flexible steel wire displacement meter and the rigid pull rod displacement meter are used as integral three direction jointmeter, in order to optimize the equipment selection and avoid the installation defects, the three-direction jointmeter is widely used in the monitoring of the peripheral joints of concrete face rockfill dam. As an example, the advantages of 3DM type three-way joint gauge in equipment selection, installation and monitoring results are analyzed. The results show that the working principle and calculation formula of the integral three-direction jointmeter for flexible steel wire displacement meter are scientific and reasonable. Compared with other types of three-way joint gauge such as split type, it has the advantages of large measuring range, convenient installation, high measuring precision and high water pressure resistance. In the project implementation, attention should be paid to control the important links in the installation process to avoid the installation defects. It has been proved by engineering practice that the monitoring results of 3DM flexible steel wire displacement meter can accurately reflect the variation of the peripheral joints of the dam by scientifically and reasonably analyzing and processing the monitoring results of the integral three-direction jointmeter. It provides a scientific and reasonable basis for dam safety evaluation.
【作者單位】： 南瑞集團公司/國網電力科學研究院;
【分類號】：TV698.1

【相似文獻】

相關期刊論文 前7條

1 戴強,李建華,蔣海偉,潘琳;3DM－200型三向測縫計的應用和發展[J];大壩觀測與土工測試;1996年01期

2 李之中;車佳磊;吳茜;潘琪;;三向測縫計研究[J];西北水電;2011年S1期

3 戴強;李建華;;西北口面板壩三向測縫計的觀測[J];大壩觀測與土工測試;1993年02期

4 熊國文;;面板堆石壩周邊縫三向測縫計的組裝方式與誤差分析[J];大壩觀測與土工測試;1993年03期

5 方緒順;霍家平;;整體式TS型三向測縫計構造及精度分析[J];水電自動化與大壩監測;2008年04期

6 付冰清;內部觀測在葛洲壩一期工程中的作用[J];水利水電技術;1983年01期

7 ;SCF三向測縫計[J];大壩觀測與土工測試;1977年02期

相關會議論文 前1條

1 張建寧;;TSJ三向測縫計在面板與趾板非平面連接狀態下的應用[A];第一屆中國水利水電巖土力學與工程學術討論會論文集（下冊）[C];2006年

，

本文編號：2249290