本文選題：筒形閥 + 過流特性�。� 參考：《水力發電》2017年03期

【摘要】：通過測取筒形閥動水關閉試驗過程中機組原始流量和工作水頭并進行擬合,得到了高水頭水輪機筒形閥不同開度下的流量特性,解決了筒形閥的流量系數率定問題。在此基礎上,建立了超長輸水發電系統筒形閥動水關閉過渡過程的數學模型,提出了數值分析方法,實現筒形閥過渡過程的仿真研究。數值計算結果與現場試驗實測結果進行了對比,一致性較好,為全面揭示超長輸水發電系統高水頭大型筒形閥的水力動態特性和運行控制方式奠定了基礎。
[Abstract]:By measuring and fitting the original flow rate and the working head of the unit during the dynamic water closure test of the cylinder valve, the flow characteristics of the cylinder valve with high head are obtained, and the problem of determining the flow coefficient rate of the cylinder valve is solved. On this basis, the mathematical model of the dynamic water closure transition process of the cylinder valve is established, and the numerical analysis method is put forward to realize the simulation study of the cylinder valve transition process. The results of numerical calculation are compared with the measured results of field test, which lays a foundation for fully revealing the hydraulic dynamic characteristics and operation control mode of large cylinder valve with high head in super long water conveyance power generation system.
【作者單位】： 中國電建集團華東勘測設計研究院有限公司;
【分類號】：TV734

【相似文獻】

相關期刊論文 前10條

1 萬百五;;按，

本文編號：1918549