本文選題：燈泡貫流水輪機　切入點：主軸　出處：《天津大學》2014年碩士論文

【摘要】：環境保護和優先發展清潔能源是21世紀世界各國面臨的重大任務。水電作為清潔與可再生能源，具有成本低、規模大、調節性強的優勢。與常規水輪機設計相比，燈泡貫流式水輪機具有結構緊湊，重量輕，，電站廠房高度小，工程投資小的特點。轉動部分是水輪機能量轉化的重要動力部件，其靜動態性能是水輪機組效率及安全運行的重要保障。本文結合具體工程項目，綜合運用理論計算、有限元分析及優化設計理論，系統研究水輪機組轉動部分結構及優化設計方法。主要工作如下： (1)在系統總結燈泡式水輪機組結構特點及總體布置形式基礎上，歸納形成了水輪機組設計流程。 (2)采用類比設計方法，完成了主軸及轉輪體結構設計。基于額定和飛逸工況下理論計算與有限元分析，提出了主軸及轉輪體關鍵結構參數確定方法。 (3)基于實驗設計及優化算法，系統研究了水輪機轉輪體及主軸的結構多目標優化設計方法，并形成了優化設計技術流程。
[Abstract]:Environmental protection and priority to develop clean energy are the major tasks facing all countries in the 21st century. As clean and renewable energy, hydropower has the advantages of low cost, large scale and strong adjustment. Bulb tubular turbine has the characteristics of compact structure, light weight, small power plant height and low project investment. Its static and dynamic performance is an important guarantee for the efficiency and safe operation of the turbine unit. The rotation part structure and optimization design method of hydraulic turbine unit are studied systematically. The main work is as follows:. 1) on the basis of summing up the structural characteristics and the general layout of the bulb turbine unit, the design process of the turbine unit is concluded. Based on the theoretical calculation and finite element analysis under rated and flight conditions, a method for determining the key structural parameters of spindle and runner is proposed. 3) based on the experimental design and optimization algorithm, the multi-objective optimization design method of turbine runner and spindle structure is studied systematically, and the technical flow of optimization design is formed.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TK733.8

【共引文獻】

相關期刊論文 前10條

1 白晶;;水輪機選型設計分析[J];科技創新與應用;2012年04期

2 吳江;段利英;賓斌;廖一衡;譚韜宇;;水輪機工作密封壓力波動缺陷處理[J];水電自動化與大壩監測;2011年03期

3 肖良瑜;李永恒;;考慮預緊力的頂蓋與座環聯合受力研究[J];東方電氣評論;2011年02期

4 馮建軍,羅興

本文編號：1670298