基于SPH方法的二維寬頂堰溢流數值模擬
發布時間:2018-03-19 18:38
本文選題:SPH 切入點:二維寬頂堰溢流 出處:《南水北調與水利科技》2017年02期 論文類型:期刊論文
【摘要】:光滑粒子水動力學方法(SPH)是一種基于純拉格朗日思想的無網格粒子方法,在眾多科學和工程領域得到了初步應用。采用SPH方法對二維寬頂堰溢流進行了數值模擬,并利用機群進行并行計算來提高計算效率,將模擬數據與試驗數據進行了對比。結果表明,SPH方法可以模擬出二維寬頂堰自由出流和淹沒出流時水流流態、水跌、回流區、水躍現象,計算出溢流流量、流速等水力參數,并且采用數據擬合得出與理論相符的斷面流速分布圖。結果表明了SPH方法可以較好模擬二維寬頂堰溢流中的流速分布以及水面曲線。
[Abstract]:Smooth particle hydrodynamic method (SPHs) is a meshless particle method based on pure Lagrangian theory, which has been applied in many fields of science and engineering. The SPH method is used to simulate the two-dimensional overflow of a wide crested Weir. The simulation data are compared with the experimental data. The results show that the SPH method can be used to simulate the water flow pattern, water drop and reflux zone when the two dimensional wide top Weir flows out freely and inundated. The hydraulic parameters such as overflow flow, velocity of flow and so on are calculated. The results show that the SPH method can well simulate the velocity distribution and the surface curve in the two dimensional wide top Weir overflow.
【作者單位】: 青海大學水利電力學院;
【基金】:國家自然基金面上基金(51479087) 水沙科學與水利水電工程國家重點實驗室開放研究基金資助課題(sklhse-2015-B-02) 青海大學高層次人才項目(k160024)~~
【分類號】:TV132.2
【相似文獻】
相關期刊論文 前1條
1 繆吉倫;陳景秋;張永祥;;基于SPH方法的立面二維涌浪數值模擬[J];中南大學學報(自然科學版);2012年08期
,本文編號:1635515
本文鏈接:http://sikaile.net/kejilunwen/shuiwenshuili/1635515.html
最近更新
教材專著