PY10-8/5大位移井是中海油在中國南海的重點難點項目。該大位移井項目中表層防碰,表層大尺寸井眼造斜,高穩斜角長位移井段作業提速和井下工具的磨損都嚴重制約了定向施工作業進程。在深入分析該項目定向鉆井作業技術難點的基礎上,參考國內外大位移井定向鉆井技術,根據該區塊的鉆井經驗進行了定向作業難點攻關優化。通過優化井眼軌道,優化鉆具組合,使用并優選旋轉導向鉆井工具,模擬與實時跟蹤分析作業工程參數,逐步形成了適合該大位移井項目的定向鉆井作業配套技術。這些鉆井工藝的應用使PY10-8/5大位移井項目得以順利、高效、經濟地完成,并對其他同類項目有一定的借鑒意義。

【文章頁數】：5 頁

【文章目錄】：
1 井身結構設計概況Summary of casing program design
2 施工難點與挑戰分析Difficulties and challenges
    2.1 表層防碰Surface anti-collision
    2.2 表層井段造斜Whipstocking of surface hole section
    2.3 #406.4 mm井段軌跡控制Trajectory control of#406.4 mm hole section
    2.4 #311.2 mm井段定向鉆井風險與作業提速提效Risk&ROP and efficiency increase of directional drilling in#311.2 mm hole section
    2.5 #215.9 mm井段ECD控制與軌跡控制ECD and trajectory control of#215.9 mm hole
3 作業配套技術Supporting technologies
    3.1 防碰風險控制Anti-collision risk control
        3.1.1 軌跡優化
        3.1.2 優化測斜程序
    3.2 大尺寸井眼定向軌跡控制Directional trajectory control of large borehole
        3.2.1 優化鉆具組合
        3.2.2 調整鉆井參數
    3.3 專業軟件模擬作業工況Simulation of operating conditions with professional software
    3.4 優選旋轉導向系統Optimization of rotary steering system
    3.5 MWD不停泵快速測斜MWD rapid deviation angle measurement without stopping pump
4 現場應用Field application
    4.1 井眼軌跡質量Borehole trajectory quality
    4.2 實時鉆井工況監測與預判Real-time monitoring and prejudgment on drilling conditions
    4.3 鉆井作業時效Time efficiency of drilling operation
5 結論及認識Conclusions and understandings



本文編號：3863658