【摘要】：提出了壓力平衡結構外殼體與內部耐壓殼體相結合的深水油氣田電氣分配模塊殼體結構方案,闡述了壓力平衡外殼的組成,并采用圖算法對耐壓殼體的腔體和封頭壁厚進行設計。使用ANSYS Workbench軟件對內部耐壓殼體進行耐壓性分析,結果表明,腔體擁有較好的耐壓性,能滿足功能要求。
[Abstract]:In this paper, the structure scheme of electric distribution module shell of deep water oil and gas field combined with pressure balance structure shell and internal pressure resisting shell is put forward, and the composition of pressure balance shell is expounded. The wall thickness of the chamber and head of the pressure-resistant shell is designed by using the graph algorithm. The ANSYS Workbench software is used to analyze the internal pressure resistance of the shell. The results show that the cavity has better voltage resistance and can meet the functional requirements.
【作者單位】： 上海工程技術大學機械工程學院;
【分類號】：TE95

【相似文獻】

相關期刊論文 前3條

1 劉能強;氣井層間壓力平衡的計算[J];油氣井測試;1995年03期

2 劉能強;氣井層間壓力平衡的計算[J];斷塊油氣田;1996年01期

3 ;[J];;年期

，

本文編號：2417271