【摘要】：燃燒臂是用于鉆井平臺試油作業時燃燒油(氣)層經試油設備分離出來的伴生氣或油氣混合物,燃燒時會產生大量的熱輻射,對人、設備和平臺造成傷害,因此,鉆井平臺需設立相應的防護措施。針對JU2000E自升式鉆井平臺,介紹配置燃燒臂的技術參數、結構組成、性能特點、工作原理、熱輻射危害,并對熱輻射和水幕防護進行理論計算和分析,為今后鉆井平臺建造或升級時的燃燒臂選型和防熱輻射分析提供參考。
[Abstract]:The combustion arm is the associated gas or oil / gas mixture separated from the oil (gas) layer of the combustion oil (gas) layer during the oil testing operation of the drilling platform. It will produce a large amount of heat radiation during combustion and cause harm to people, equipment and platform, so, Appropriate protective measures should be set up for drilling platform. Aiming at the JU2000E jack-up drilling platform, the technical parameters, structure composition, performance characteristics, working principle, thermal radiation hazard of the combustion arm are introduced, and the theoretical calculation and analysis of thermal radiation and water curtain protection are carried out. It provides a reference for the selection of combustion arm and the analysis of thermal radiation protection when drilling platform is built or upgraded in the future.
【作者單位】： 中國石油集團海洋工程有限公司鉆井事業部;上海外高橋造船海洋工程設計有限公司;
【分類號】：TE951

【相似文獻】

相關期刊論文 前2條

1 唐明成;魏小丹;李兵泉;;液壓旋轉式燃燒臂主體結構制造工藝分析[J];石油機械;2009年07期

2 ;[J];;年期

相關碩士學位論文 前1條

1 張金良;基于有限元法的燃燒臂結構強度分析[D];大連海事大學;2012年

，

本文編號：2399766