本文選題：油氣集輸 + 工藝方案�。� 參考：《東北石油大學》2017年碩士論文

【摘要】：歡采采油站并轉簡化工程是油田采油后期,面對油田產能規模下降以及集輸系統能耗大,提高綜合效益的一項工程。本文提出為了適應區塊產能規模下降的實際情況,對已建集油系統進行適應性改造。結合各計量站和計量接轉站的實際位置及生產單位的管理要求,對計量站和計量接轉站進行并轉簡化,達到降低集油系統運行能耗的目的。在遵循油氣田地面工程標準化設計、數字化建設和管理的基礎上,充分優化儀表選型和控制方案,采用安全可靠、技術先進、操作維護方便、經濟合理的儀表設備和控制系統。本文最后從HSE、節能及消防設計出發對所設計的地面工程進行了經濟評估。得到比較適合換采采油站的方案。
[Abstract]:The parallel simplification project of Huan production Station is a project which can improve the comprehensive benefit in the face of the decline of production capacity scale of oilfield and the large energy consumption of gathering and transportation system in the late stage of oil field production. In order to adapt to the actual situation that the production capacity of the block decreases, this paper puts forward the adaptive transformation of the built oil gathering system. Combined with the actual position of the metering stations and metering transfer stations and the management requirements of the production units, the metering stations and metering transfer stations were simplified and the energy consumption of the oil gathering system was reduced. Based on the standardized design of oil and gas field surface engineering, digital construction and management, the instrument selection and control scheme is optimized, and the instrument equipment and control system are adopted, which are safe and reliable, advanced in technology, easy to operate and maintain, and economical and reasonable. Finally, the economic evaluation of the designed ground engineering is carried out from HSE, energy saving and fire protection design. To obtain a more suitable for the replacement of oil extraction stations.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TE41
，

本文編號：2062717