串珠狀縫洞型碳酸鹽巖儲層壓力變化特征研究
本文選題:串珠狀縫洞型碳酸鹽巖 + 數學模型 ; 參考:《西南石油大學學報(自然科學版)》2017年01期
【摘要】:目前的縫洞型碳酸鹽巖儲層模型建立主要以多重介質、滲流、管流或滲管流結合等理論為基礎,但是當儲層內具有大尺度溶洞時,多重介質、滲流理論不能準確表征宏觀縫洞儲集體。當儲層內具有大開度裂縫時,其內部流體流動特征與平板流特征更為接近。因此,需要建立以裂縫平板流與宏觀非均質性理論為基礎的儲層模型。根據氣體物質守恒方程與流體力學方程,推導了更接近于真實大型裂縫中氣體流動特征的平板流動模型,建立了串珠狀縫洞型碳酸鹽巖氣藏儲層的宏觀非均質數學模型,并通過數值方法求解出該模型定產量生產時井底壓力與各溶洞壓力數據。繪制出了溶洞壓力導數半對數曲線和井底壓力雙對數曲線。壓力導數雙對數曲線可以分為4段:井筒儲集反應段、裂縫反應階段、溶洞反應階段和邊界反應階段。隨后,分別研究了各類縫洞參數對壓力導數雙對數曲線形態特征的影響。研究表明,不同的縫洞參數會影響壓力導數雙對數曲線上相應階段的形態特征。
[Abstract]:The current model of fractured and cavernous carbonate reservoir is mainly based on the theories of multiple media, percolation, pipe flow or seepage pipe flow, but when there are large scale caverns in the reservoir, there are multiple media. The percolation theory can not accurately characterize the macroscopic fracture and cavern reservoir. When there are large opening fractures in the reservoir, the characteristics of fluid flow in the reservoir are closer to those of the flat flow. Therefore, a reservoir model based on the theory of fractured plate flow and macroscopic heterogeneity is needed. Based on the gas material conservation equation and fluid dynamics equation, a plate flow model is derived, which is closer to the characteristics of gas flow in real large fractures, and a macroscopic heterogeneous mathematical model is established for the reservoir of series beaded fractures and cavernous carbonate reservoirs. The data of bottom hole pressure and cavern pressure are obtained by numerical method. The semi-logarithmic curve of the pressure derivative and the double logarithmic curve of the bottom hole pressure are plotted. The double logarithmic curve of pressure derivative can be divided into four sections: wellbore reservoir reaction stage, fracture reaction stage, cavern reaction stage and boundary reaction stage. Then, the influence of various fracture and cavity parameters on the shape of double logarithmic curve of pressure derivative is studied. The results show that different fracture and cavity parameters will affect the morphological characteristics of the corresponding phase on the double logarithmic curve of pressure derivative.
【作者單位】: 中國石油塔里木油田公司勘探開發研究院;"油氣藏地質及開發工程"國家重點實驗室·西南石油大學;
【基金】:中國石油塔里木油田局級項目(041013100041)
【分類號】:TE31
【相似文獻】
相關期刊論文 前10條
1 龍建東,徐安娜,李明;縫洞型碳酸鹽巖內部局域振幅橫向差異性儲層預測法[J];石油地球物理勘探;2003年01期
2 朱哲顯;但濤;周程;;縫洞型碳酸鹽巖飽和度建立方法研究[J];西部探礦工程;2014年07期
3 羅娟;王雷;榮元帥;;塔河縫洞型碳酸鹽巖油藏注水壓錐研究[J];石油地質與工程;2008年02期
4 鄭小敏;孫雷;侯亞平;李平;楊大千;王宇飛;;縫洞型碳酸鹽巖油藏水驅油物理模型對比實驗研究[J];重慶科技學院學報(自然科學版);2009年05期
5 潘林華;張士誠;張勁;張平;;縫洞型碳酸鹽巖裂縫擴展分析[J];科學技術與工程;2012年12期
6 李柏林;涂興萬;李傳亮;;塔河縫洞型碳酸鹽巖底水油藏產量遞減特征研究[J];巖性油氣藏;2008年03期
7 涂興萬;;縫洞型碳酸鹽巖底水油藏水錐風險條件綜合評判[J];斷塊油氣田;2011年03期
8 王曦莎;易小燕;陳青;袁恩來;;縫洞型碳酸鹽巖井間連通性研究——以S48井區縫洞單元為例[J];巖性油氣藏;2010年01期
9 閆長輝;王濤;陳青;;縫洞型碳酸鹽巖油藏水驅曲線多樣性與生產特征關系——以塔河油田奧陶系碳酸鹽巖油藏為例[J];物探化探計算技術;2010年03期
10 康志江;李江龍;張冬麗;吳永超;張杰;;塔河縫洞型碳酸鹽巖油藏滲流特征[J];石油與天然氣地質;2005年05期
相關會議論文 前1條
1 康志江;趙艷艷;;縫洞型碳酸鹽巖油藏數值模擬新方法與應用[A];中國力學學會學術大會'2009論文摘要集[C];2009年
相關重要報紙文章 前2條
1 雒永春 楊東輝 雷從營;塔河采油二廠日產原油突破1.1萬噸[N];中國石化報;2009年
2 本報記者 孫希利 通訊員 王鵬飛;節點管理實現“雙二十”目標[N];中國石化報;2011年
相關博士學位論文 前2條
1 康志江;縫洞型碳酸鹽巖油藏數值模擬研究與應用[D];中國地質大學;2014年
2 李紅凱;縫洞型碳酸鹽巖儲層建模及剩余油分布研究[D];中國地質大學(北京);2012年
相關碩士學位論文 前6條
1 朱哲顯;縫洞型碳酸鹽巖巖石物理參數尺度效應研究[D];西南石油大學;2014年
2 馬旭;縫洞型碳酸鹽巖油藏注水替油井失效治理研究[D];西南石油大學;2015年
3 李立峰;縫洞型碳酸鹽巖油藏注水機理研究[D];中國石油大學;2010年
4 龍旭;縫洞型碳酸鹽巖油藏油井連通模式與生產動態的關系研究[D];中國地質大學(北京);2012年
5 崔文彬;塔河四區縫洞型碳酸鹽巖儲層地質建模研究[D];中國地質大學(北京);2012年
6 林興;潛山縫洞型碳酸鹽巖油藏數值模擬方法研究[D];西南石油大學;2014年
,本文編號:1925236
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/1925236.html