本文選題：環空堵塞 + 預防��； 參考：《東北石油大學》2017年碩士論文

【摘要】：大位移井鉆井過程中對環空堵塞能量的計算對于校核鉆機設備能力或選擇、升級改造鉆機設備,優化大位移井井眼軌道設計等具有重要作用。以前的研究只是定性的指出這方面的問題。本題目從水力能量入手,結合井塌、沉砂、砂橋、巖屑床等井下復雜情況,建立了清除環空堵塞物所需水力能量的計算模型,并提出了處理上述復雜情況的具體措施,從而找出解除環空堵塞的方法,達到消除因坍塌、沉砂、砂橋、巖屑床引起的井下復雜情況。論文根據所建立的數學模型,編制了處理環空堵塞所需水力參數優化設計程序。論文通過軟件進行實例計算,對兩口井的井眼環空堵塞所需水能量狀況進行了分析評價。
[Abstract]:The calculation of the clogging energy of annulus in the drilling process of extended reach well plays an important role in checking the capacity or selection of drilling rig equipment upgrading the rig equipment and optimizing the design of borehole track. Previous studies have merely qualitatively pointed out this problem. Starting from the hydraulic energy and combining the complex conditions of well collapse, sand sinking, sand bridge and cuttings bed, the calculation model of hydraulic energy needed to remove the clogging material in annulus is established, and the concrete measures to deal with the above complex situation are put forward. The method of removing the clogging of annulus is found to eliminate the complex situation caused by collapse, sand sinking, sand bridge and cuttings bed. According to the established mathematical model, the optimal design program of hydraulic parameters for the treatment of annular blockage is worked out in this paper. The paper analyzes and evaluates the water energy situation of the two wells in the annular hole plugging by the example calculation of the software.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TE28

【相似文獻】

相關期刊論文 前3條

1 姚彩銀;張紹槐;;井底射流的室內實驗研究[J];天然氣工業;1987年02期

2 熊繼有,陳小愉,錢聲華,王忠生,田繼東,薛亮,周鵬高,鐘水清;基于它激振蕩增大水力能量的理論研究[J];鉆采工藝;2005年05期

3 王希勇,熊繼有,張藝瀚;新型水力增壓理論研究[J];天然氣工業;2002年05期

，

本文編號：1906059