本文選題：超前注水 + 裂縫與井網優化　； 參考：《東北石油大學》2015年碩士論文

【摘要】：低滲透油藏具有儲層致密、滲流阻力大、儲量動用程度低等特點,因此如何合理開發低滲透油藏,取得良好的開發效果和經濟效益,已經成為我國維持石油工業穩定發展的重要問題之一。X71試驗區扶楊油層屬于低滲透油藏,已投入生產3年,為了確定試驗區合理開發方案,本文分別從開發井網優化、壓裂與井網匹配優化、合理開發技術政策等方面進行了數值模擬研究;根據合理開發方案的各參數要求,對現井網開發方案進行了適應性評價并對其不足之處進行了相應調整;最后對合理開發方案的開發效果進行了預測。本文在數值模擬過程中,采用了局部網格加密的方法模擬人工裂縫的長度、導流能力等參數,應用“門限壓力”關鍵字模擬啟動壓力的存在。在方案設計過程中,開發井網優化分別從不同布井方案(不同井距、排距)、不同注水方式(反九點法面積注水、五點法面積注水、線性注水)研究合理的井網密度和注水方式;壓裂與井網匹配優化時,分別從井排方向與人工裂縫方向、裂縫長度兩方面研究匹配關系;研究超前注水政策時,分別從合理配注強度、地層壓力保持水平、合理注采比和采油速度4個方面進行技術界限的確定。本文對試驗區合理開發方案的研究,不僅為扶楊油層的開發提供了理論依據和技術經驗,更對油田產量后續接替,可持續發展具有重要意義。
[Abstract]:Low permeability reservoirs are characterized by tight reservoir, large percolation resistance, low reserve production degree and so on. Therefore, how to develop low permeability reservoir reasonably and obtain good development effect and economic benefit, Fuyang reservoir, one of the important problems in maintaining the stable development of petroleum industry in China, has been put into production for 3 years. In order to determine the reasonable development plan of the test area, this paper optimizes the well pattern from the development well pattern. The numerical simulation of fracturing and well pattern matching optimization, reasonable development technology policy and so on is carried out, and the adaptability evaluation of existing well pattern development scheme is carried out according to the requirements of each parameter of reasonable development scheme and the corresponding adjustment is made to its shortcomings. Finally, the development effect of reasonable development scheme is forecasted. In the process of numerical simulation, the local mesh encryption method is used to simulate the parameters of artificial crack length and diversion ability, and the threshold pressure keyword is used to simulate the existence of starting pressure. In the process of scheme design, the reasonable well pattern density and water injection mode are studied from different well layout schemes (different well spacing, row spacing, different water injection methods (anti-nine-point area water injection, five-point area water injection, linear water injection) respectively). In the optimization of fracturing and well pattern matching, the matching relationship is studied from two aspects, namely, well row direction and artificial fracture direction, fracture length, and rational injection intensity and formation pressure level. Reasonable injection-production ratio and oil recovery speed are determined in four aspects. In this paper, the reasonable development plan of the test area not only provides the theoretical basis and technical experience for the development of Fuyang reservoir, but also plays an important role in the follow-up of oil field production and sustainable development.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE348

【參考文獻】

相關期刊論文 前1條

1 劉桂平;閆建聚;霍紅振;鐘小菊;李玉清;;油藏剩余油精細描述技術在文16塊的研究及應用效果[J];中國石油和化工標準與質量;2012年11期

，

本文編號：1902004