本文選題：路燈遠程控制器 + 組態軟件��； 參考：《東北石油大學》2016年碩士論文

【摘要】：油田針對路燈的控制,主要分散于場區各路燈控制開關箱處,每處開關箱約帶100基路燈,對路燈的啟�？刂凭图杏陂_關箱內的控制器。按照季節變化,日照時間的長短,需要人工定期到控制開關箱內調節控制器啟停時間,同時監測路燈各相電流情況,來判斷電纜有無接地、短路故障。隨著無線網絡技術與電子技術的發展,可以將人工修改控制器時間以及監控日照時間長度、電流運行值、溫度等數據通過遠程修改和采集,智能對路燈的運行進行遠程控制。本文針對油田特定的功能,研制了路燈智能控制器,作為遠端設備放置于開關箱內部,用于啟動控制路燈的交流接觸器,從而通過交流接觸器,啟動路燈�？刂破鲙в泄鈴姴杉K、RTC時鐘控制模塊、電流采集模塊、無線模塊。因此可以通過該遠端設備實現對路燈的時鐘控制、光強信號、電流信號的采集以及數據回傳。本文同時研制了路燈遠程控制系統的手持設備,在無線通訊距離內,可通過手持設備,完成對路燈遠端控制設備的啟停時間修改、點亮及熄滅的實時控制,回傳電流數據及光照強度參數。本文研究了組態王軟件與單片機MODBUS-ASCII通訊協議及通訊方式。通過計算運行組態王軟件,并連接大功率無線模塊的方式,在計算機上也可實現對路燈遠端控制器電流、光強、溫度數據的采集,同時可以完成對遠端控制器時鐘的修改及路燈啟停的即時控制。
[Abstract]:The control of the street lamp is mainly scattered in the control switch box of the street lamp, with 100 basic road lamps in each switch box. The control of the start and stop of the street lamp is concentrated on the controller in the switch box. According to the seasonal change, the length of the sunshine time needs to be regularly controlled in the open box to control the stop time and monitor the street lamp. With the development of the wireless network technology and electronic technology, the artificial modification time of the controller, the length of the monitoring time, the current running value, the temperature and so on can be remotely controlled by the remote control of the running of the street lamp. The intelligent controller of road lamp is designed and developed. As a remote device, it is placed inside the switch box and is used to start the AC contactor to control the street lamp. Through the AC contactor, the road lamp is started. The controller is equipped with the light intensity acquisition module, the RTC clock control module, the current acquisition module and the wireless module. In this paper, the handheld devices of the remote control system of street lamps are developed at the same time. In the distance of the wireless communication, a handheld device can be used to complete the revise of the start and stop time of the remote control equipment of the street lamp, the real-time control of the light and the extinguishing, the return of the current data and the light. In this paper, the communication protocol and communication mode of the Kingview software and the single chip microcomputer MODBUS-ASCII are studied. By calculating the Kingview software and connecting the high-power wireless module, the remote controller current, light intensity and temperature data can be collected on the computer, and the remote controller clock can be completed at the same time. The modification of the lamp and the instant control of the street light start and stop.

【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TE94;TP273

【參考文獻】

相關期刊論文 前1條

1 李家福;余立建;郭成寶;張耀文;孫東升;;基于GSM網絡的智能監控模塊設計[J];國外電子元器件;2005年12期

，

本文編號：1829134