本文選題：含磷硼酸酯 + 潤滑油添加劑　； 參考：《硅酸鹽通報》2017年01期

【摘要】：試驗采用酯化法,選用乙醇作為帶水劑,以十六醇、硼酸與五氧化二磷為原料,在一定的條件下反應,生成一種水解穩定性高、抗磨性能好的含磷硼酸酯潤滑油添加劑。合成的最佳反應條件為十六醇、硼酸與五氧化二磷的摩爾比為7∶2∶1,反應溫度為105~110℃,脫水反應4 h。用四球機測試含該添加劑的基礎油的抗磨性能,結果表明試驗制備的含磷硼酸添加劑能顯著提高基礎油的抗磨性能,且其添加劑存在一個最佳值。將所合成的含磷硼酸酯潤滑油添加劑在新東北電氣集團罐體車間試用,潤滑效果與抗磨性能非常適宜。
[Abstract]:The esterification method was used and ethanol was selected as a water carrying agent with sixteen alcohol, boric acid and phosphorus pentoxide as raw materials. Under certain conditions, a high hydrolysis stability and good antiwear property of boric acid ester lubricating oil additive was produced. The optimum reaction condition was sixteen alcohol, and the molar ratio of boric acid to phosphorus pentoxide was 7: 2: 1. The reaction temperature is 105~110 C, and the dehydration reaction 4 h. is used to test the antiwear properties of the base oil containing the additive by four ball machines. The results show that the phosphorus containing boric acid additive can significantly improve the anti-wear performance of the base oil, and the additive has a best value. The trial of the tank tank workshop is very suitable for lubricating effect and antiwear performance.

【作者單位】： 遼寧石油化工大學石油化工學院;東北大學冶金學院;新東北電氣集團;
【分類號】：TE624.82

【參考文獻】

相關期刊論文 前10條

1 熊桑;孫建林;徐陽;嚴旭東;;基于分子動力學理論制備含氮磷硼酸酯添加劑及其摩擦學性能[J];中國有色金屬學報;2015年06期

2 李明佳;李三喜;張文政;王松;;含氮硼酸酯潤滑油添加劑的合成與性能研究[J];遼寧化工;2012年03期

3 紀靈嫻;陳鵬;王德;叢玉鳳;黃瑋;;可用作潤滑油添加劑的含氮硼酸酯的制備[J];遼寧石油化工大學學報;2012年01期

4 劉菁;汪靈;葉巧明;李c伝，

本文編號：1820839