本文選題：天然氣脫碳 + 中試實驗　； 參考：《石油學報(石油加工)》2017年05期

【摘要】：醇胺法脫碳已廣泛應用于天然氣凈化工藝中,為了達到降能增效的目的,需要對醇胺法脫碳的工藝操作參數進行優化。在前期優選配方研究的基礎上,筆者利用一套中試實驗裝置,分析中試實驗操作參數變化對配方胺液吸收和再生效果的影響,得到較優的吸收和再生工藝操作參數范圍。結合實驗結果,采用HYSYS軟件建模,對于不同CO_2含量的原料氣在處理量為50Nm~3/h時進行醇胺法脫碳工藝參數的優化分析,確定在相應的醇胺循環量下最優的吸收溫度為55℃、吸收壓力為3.0 MPa、再生溫度117℃、再生壓力45kPa及不同CO_2含量的原料氣處理量與醇胺循環流量的最大氣/液比,為醇胺法脫碳的工業應用提供參考。
[Abstract]:Alcohol-amine decarbonization has been widely used in natural gas purification process. In order to reduce energy and increase efficiency, it is necessary to optimize the process parameters of decarbonization by alcohol-amine method. On the basis of the previous research on the optimized formula, the author used a pilot experiment device to analyze the effect of the operation parameters of the pilot experiment on the absorption and regeneration of the formulation amines, and to obtain a better range of the operating parameters of the absorption and regeneration process. Combined with the experimental results, the HYSYS software was used to model the process parameters of decarbonization of raw gas with different CO_2 content (50Nm~3/h), and the optimum absorption temperature was 55 鈩，

本文編號：1803306