本文選題：多相流混輸 + 垂直管��； 參考：《東北石油大學》2015年碩士論文

【摘要】：在油氣井開采石油或天然氣的過程中,幾乎不可避免地要涉及到多相混合流體在垂直管道或水平管道中的流動。油氣水混輸管道的壓降計算是油氣集輸管道設計及運行管理過程中水力計算的主要內容之一。由于垂直管道或水平管道中多相流的復雜性,在實際壓降的計算中多采用經驗計算方法進行壓降的計算,以保證計算的準確度。PIPEPHASE軟件主要用于油田集油系統油氣水三相流混輸計算,包括了油氣水多相混輸管道的穩態計算模塊,其中提供了許多計算公式和方法。本文根據公開發表的實驗數據,利用PIPEPHASE軟件中的多種方法對垂直管或水平管中多相流動壓降進行各種壓降計算方法的模擬,將模擬結果與試驗結果進行對比分析,確定出各種計算方法的實驗誤差和計算誤差。同時也討論了原油含水率、油品溫度、油井產氣量等參數對計算結果和誤差的影響。本課題的研究,可以為油田實際應用PipePhase軟件中計算方法的選擇提供了依據,提高了計算準確性,有助于油田生產管理。
[Abstract]:Oil?In the process of producing oil or gas in gas wells, it is almost inevitable to involve the flow of multiphase mixed fluids in vertical or horizontal pipelines.The calculation of pressure drop of oil-gas-water mixed pipeline is one of the main contents of hydraulic calculation in the design and operation management of oil-gas gathering pipeline.Because of the complexity of multiphase flow in vertical or horizontal pipeline, the empirical method is often used to calculate the pressure drop in the calculation of actual pressure drop.The PIPEPHASE software is mainly used in the calculation of oil-gas-water three-phase mixed flow in oil gathering system, including the steady state calculation module of oil-gas-water multiphase mixing pipeline, in which many calculation formulas and methods are provided.Based on the published experimental data, various pressure drop calculation methods for multiphase flow in vertical or horizontal tubes are simulated by using various methods in PIPEPHASE software. The simulation results are compared with the experimental results.The experimental error and calculation error of various calculation methods are determined.At the same time, the influence of the parameters such as crude oil water cut, oil product temperature and well gas production on the calculation results and error are also discussed.The research of this subject can provide the basis for the selection of calculation methods in the application of PipePhase software in oil field, improve the accuracy of calculation, and be helpful to oilfield production management.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE319

【參考文獻】

相關期刊論文 前2條

1 徐阿林,王如義;地層原油粘度的研究[J];大慶石油地質與開發;1986年03期

2 于立軍,蔣安眾,虞亞輝,胡天本;水平管內油氣水三相流動特性研究[J];上海交通大學學報;2000年09期

，

本文編號：1742668