本文選題：數值模擬　切入點：三次加密井　出處：《東北石油大學》2015年碩士論文

【摘要】：本文根據杏六區西部數據資料,應用Petrel地質建模軟件,在沉積相約束條件下建立杏六區西部儲層三維地質模型。根據地質建模結果和油藏生產動態數據,應用Eclipse軟件對產液量、含水率等進行歷史擬合,對地質儲量、采出程度進行計算。在歷史擬合的基礎上,根據數值模擬結果分析目前和不調整預測到含水98%時縱向上和平面上剩余油分布情況,研究了杏六區西部補孔調整潛力。在此基礎上,結合區塊油層發育情況及原井網部署特點,制定了薩Ⅱ油層組補孔原則。在沉積相帶圖上,嚴格根據補孔原則對薩Ⅱ油層組的三次加密井逐井逐層篩選。對篩選結果進行數值模擬計算,根據剩余油分布以及水淹級別調整補孔層位,制定補孔層位方案。通過對比不同方案的開發效果和經濟效益,得到了最優補孔層位方案。在現井網生產預測的基礎上,選定在三次加密井不同含水級別對薩II油層組進行補孔調整,用數值模擬方法預測不同補孔時機的開發指標。方案預測時,三次加密井的薩Ⅱ油層組和薩Ⅲ及以下油層組作為兩套層系分別監控含水率變化,單井層系含水到達98%時,即關掉該井該層系。對不同補孔時機方案進行經濟評價,優選出經濟效益最好的兩個補孔時機,加密補孔時間點,對補孔時機方案進行細化研究。用數值模擬方法預測細化方案的開發指標,結合經濟評價給出杏六區西部薩Ⅱ油層組合理的補孔時機。
[Abstract]:Based on the data of the western part of Xingliu area, a 3D reservoir geological model of the western part of Xingliu area is established under the condition of sedimentary facies constraint by using the Petrel geological modeling software.According to the result of geological modeling and the data of reservoir production performance, Eclipse software is used to carry out historical fitting of liquid production and water cut, and the geological reserves and recovery degree are calculated.On the basis of historical fitting, according to the results of numerical simulation, the distribution of remaining oil in longitudinally and on the plane at the time of 98% water cut is analyzed, and the adjustment potential of hole filling in the west of Xing6 region is studied.On this basis, combined with the development of the reservoir and the characteristics of the original well pattern arrangement, the principle of filling holes in the formation of the sa 鈪，

本文編號：1708882