基于機采和集油系統整體能耗最低的集油參數優化方法
本文選題:集油系統 切入點:機采系統 出處:《中國石油大學學報(自然科學版)》2017年05期 論文類型:期刊論文
【摘要】:將環狀集油環上的抽油機井與集油管網作為研究對象,基于多相水平管流模型和抽油機井動態參數的仿真技術建立集油管網壓降、抽油機井井口油壓與集油系統摻水參數關系的仿真模型及抽油機井輸入功率、油井產量與井口油壓之間關系的數學模型,即抽油機井輸入功率、油井產量與摻水參數之間關系的數學模型。分別以集油和機采系統總能耗最低、集油和機采系統效益最大為優化設計的目標函數,建立集油系統摻水參數優化設計的數學模型。結果表明:井口油壓對抽油機井輸入功率與油井產量有顯著影響;摻水溫度與摻水流量對集油和機采系統總能耗、總效益具有顯著影響,將機采與集油系統作為整體優化可顯著提高系統整體經濟效益。
[Abstract]:Based on the multi-phase horizontal pipe flow model and the simulation technology of the dynamic parameters of the pumping well in the annular oil gathering ring, the pressure drop of the oil gathering pipe network is established, which is based on the multi-phase horizontal pipe flow model and the simulation technology of the dynamic parameters of the pumping well. The simulation model of the relationship between the oil pressure at the well head of the pumping unit and the mixing parameters of the oil collecting system and the mathematical model of the relationship between the input power of the pumping unit well and the oil pressure of the well head, I. E. the input power of the pumping unit well, are discussed. Mathematical model of the relationship between oil well production and water mixing parameters. The objective function of optimal design is the lowest total energy consumption of oil gathering and mechanical recovery system, and the maximum benefit of oil gathering and mechanical recovery system, respectively. A mathematical model for optimal design of water mixing parameters of oil collecting system is established. The results show that the wellhead oil pressure has a significant effect on the input power and oil well output of pumping unit, and the temperature and flow rate of water mixing have great influence on the total energy consumption of oil collection and mechanical production system. The total benefit has a significant effect, and the overall economic benefit can be significantly improved by optimizing the mechanical recovery and oil gathering system as a whole.
【作者單位】: 燕山大學機械工程學院;
【基金】:國家自然科學基金項目(51174175)
【分類號】:TE866
【相似文獻】
相關期刊論文 前10條
1 馬緒軍;薄勝杰;;沙漠油田零散井集油設計[J];油氣田地面工程;2008年02期
2 張偉哲;史偉達;任鷥鷥;;薩中油田集油工藝在油田應用的適應性分析[J];中國石油和化工標準與質量;2013年12期
3 邢賀南;;淺談薩北油田幾種集油工藝適應性[J];科技與企業;2014年10期
4 董瑞珍,高彥平,底國彬,趙建興;邊緣區塊油田集油工藝優化研究[J];石油規劃設計;2005年06期
5 劉艷;底國彬;劉靜;劉義敏;李繼述;劉福貴;;冀中油田集油流程優化研究[J];石油規劃設計;2006年06期
6 王玉文;;薩北油田單井集油工藝及配套技術[J];油氣田地面工程;2009年06期
7 盧玉峰;;英臺油田低溫集油技術[J];油氣田地面工程;2010年05期
8 張書文;;杏南油田不加熱集油技術應用效果分析[J];油氣田地面工程;2010年08期
9 田玉凱;張春剛;;集油工藝簡化的瓶頸問題探討[J];油氣田地面工程;2011年03期
10 吳巖慶;于孝合;;電熱集油節能運行規律及應用效益評價[J];石油石化節能;2011年03期
相關會議論文 前1條
1 劉揚;王志華;成慶林;李玉春;;油水乳狀液轉相特性及其對集油工藝適應性的影響[A];流變學進展(2012)——第十一屆全國流變學學術會議論文集[C];2012年
相關重要報紙文章 前1條
1 通訊員 韓國勇;一年可省能耗費170萬[N];大慶日報;2011年
相關碩士學位論文 前8條
1 李曉亮;大慶外圍油田某區塊地面建設模式及工藝優化[D];東北石油大學;2016年
2 王紅全;低產油田高含水期單管不加熱集油工藝應用研究[D];東北石油大學;2010年
3 李朋;特高含水期單管通球不加熱集油工藝適應性研究[D];東北石油大學;2012年
4 王峰;葡北油田集油系統合理生產參數界限研究[D];東北石油大學;2010年
5 王洪申;羧酸、酰胺和酯類表面膜在水面溢油集油劑中的應用研究[D];中國海洋大學;2003年
6 王忠良;海拉爾油田電熱管集油工藝技術研究與應用[D];東北石油大學;2013年
7 王雪;榆樹林油田單管電加熱集油工藝研究[D];大慶石油學院;2009年
8 童志雄;基于機采和集油系統整體的摻水參數優化[D];燕山大學;2015年
,本文編號:1610258
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/1610258.html