【摘要】：隨著國家城市化進程的加快,商品混凝土市場得到了前所未有的發展,混凝土攪拌運輸車的作用就顯得尤為重要。本文針對某公司設計要求,分析和總結了現有混凝土攪拌運輸車的特點,采用三維建模技術和有限元分析技術,進行了其關鍵零部件的分析和設計,完成了新型混凝土攪拌運輸車的設計與研究,取得了良好的經濟和社會效益。 首先,分析和總結了現有混凝土攪拌運輸車存在問題,包括罐體使用壽命短、攪拌葉片使用壽命短、攪拌效果和出料速度不理想、出料殘余率高等,指出了問題的原因,并用于整車和零部件的設計。 然后,采用三維建模技術和SolidWorks軟件,建立了攪拌罐和攪拌葉片的參數化模型,并采用IGES格式導入有限元分析軟件ANSYS中,建立了其有限元模型,完成了攪拌罐和攪拌葉片的有限元分析。在有限元分析結果基礎上,對攪拌罐和攪拌葉片進行了改進設計。 最后,進行了副車架、操縱機構、罐體后支架、供水系統、裝卸料裝置設置等主要部件的分析和改進研究,提出了相應的設計方案。 本文的設計和研究延長了混凝土攪拌運輸車罐體和攪拌葉片的使用壽命,提高了出料速度,降低了出料殘余率和生產成本,達到了更好的攪拌出料效果。
[Abstract]:With the acceleration of national urbanization, the commercial concrete market has been unprecedented development, the role of concrete mixing truck is particularly important. In this paper, according to the design requirements of a company, the characteristics of the existing concrete mixing truck are analyzed and summarized, and the analysis and design of its key parts are carried out by using 3D modeling technology and finite element analysis technology. The design and research of a new type of concrete mixing truck have been completed, and good economic and social benefits have been obtained. First of all, the existing problems of concrete mixing truck are analyzed and summarized, including short service life of tank, short service life of mixing blade, unsatisfactory mixing effect and discharge speed, high discharge residual rate, etc., and the causes of the problems are pointed out. And used in the design of the whole vehicle and parts. Then, the parametric model of mixing tank and stirring blade is established by using 3D modeling technology and SolidWorks software, and the finite element model is established by introducing IGES format into finite element analysis software ANSYS. The finite element analysis of mixing tank and stirring blade is completed. Based on the results of finite element analysis, the mixing tank and stirring blade are improved. Finally, the main components, such as auxiliary frame, control mechanism, tank rear support, water supply system, loading and unloading device, are analyzed and improved, and the corresponding design scheme is put forward. The design and research in this paper prolong the service life of the tank and the mixing blade of the concrete mixing truck, increase the discharge speed, reduce the discharge residual rate and production cost, and achieve a better mixing effect.
【學位授予單位】：鄭州大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU642

【參考文獻】

相關期刊論文 前9條

1 董志明;姚樹軍;白篤;;混凝土攪拌運輸車副車架和后支撐結構優化設計[J];工程機械;2010年05期

2 楊忠敏;;混凝土攪拌運輸車的結構特點及維護檢查[J];建筑;2008年16期

3 王艷;;抗磨鑄鋼件的焊接修復[J];熱加工工藝;2006年01期

4 翟雪琴;葛建兵;陳立峰;;混凝土攪拌車攪拌葉片優化設計[J];機械工程與自動化;2007年05期

5 張福培;從國內外砼攪拌樓(站)的現狀看國內產品的差距和發展方向[J];水利電力施工機械;1998年02期

6 何潤生;孟小梅;陳強;;A4VSO變量泵與工程機械節能技術研究[J];液壓與氣動;2008年01期

7 王欣;易小剛;;國外平地機的變功率控制[J];筑路機械與施工機械化;2007年10期

8 謝開泉;;我國混凝土攪拌運輸車市場情況分析及預測[J];專用汽車;2007年04期

9 左五洲;李軍;胡鋼;;我國混凝土攪拌運輸車行業前景廣闊[J];專用汽車;2007年09期

相關博士學位論文 前1條

1 趙悟;攪拌裝置參數優化的研究[D];長安大學;2005年

相關碩士學位論文 前2條

1 徐小麗;高過載條件下微型加速度計的動態分析[D];南京理工大學;2009年

2 周磊;混凝土攪拌運輸車節能控制方法研究[D];長安大學;2009年

，

本文編號：2479788