人字形中心支撐鋼框架滯回能需求層間分布規律
[Abstract]:The current seismic code adopts the method of elastic design based on bearing capacity without considering the response of the structure after entering inelastic and the influence of strong earthquake duration. The seismic design method based on energy can consider the factors such as force, displacement and duration at the same time, so the damage degree of the structure can be comprehensively evaluated. The hysteretic energy is the main parameter of the energy-based seismic design method, and predicting the distribution of the hysteretic energy in the structure will lay the foundation of the energy-based design method. In this paper, SAP2000 is used to design 10 story 3 span, 15 story 3 span and 20 story 3 span steel frame with herringbone center bracing. In ABAQUS finite element software, beam element is used to input selected far field seismic waves and near field seismic waves with pulse effect. This paper analyses the hysteretic energy demand between the lower layer of 8 degree (0.3 g) near field earthquake, the distribution law of the hysteresis energy demand layer, the proportion of the energy consumption of the support hysteresis, and puts forward three kinds of structures far away. The formula for calculating the distribution coefficient of hysteretic energy layer under near-field earthquake; The analysis shows that the near field earthquake will increase the bottom response of the structure and the energy consumption of the frame Liang Zhu member. According to the seismic code of our country, the steel frame with herringbone central bracing underestimates the effect of the near field earthquake with pulse effect on the structure. A series of examples are designed to analyze the influence of different ground motion parameters and structural parameters on the interlaminar distribution of hysteretic energy demand.
【學位授予單位】:蘇州科技學院
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU391
【相似文獻】
相關期刊論文 前10條
1 邵建中;顧強;沈健超;;基于屈服點譜法的中心支撐鋼框架抗震性態評估[J];四川建筑科學研究;2012年05期
2 ;足尺中心支撐鋼梁框架受拉的試驗和數值研究[J];鋼結構;2013年02期
3 于海豐;方斌;;鋼框架-中心支撐雙重體系抗彎框架設計方法研究[J];土木工程學報;2013年S2期
4 沈健超;顧強;;中心支撐鋼框架抗震性態評估——屈服點譜法[J];蘇州科技學院學報(工程技術版);2011年01期
5 鄒丹丹;于海豐;;中心支撐鋼框架中支撐跨柱設計方法簡介[J];科技信息;2011年26期
6 張付可;寧志剛;蔣小蓉;;某中心支撐鋼框架主廠房結構方案分析比較[J];建筑結構;2007年07期
7 李玉榮;蔡康峰;唐月;;中心支撐-框架鋼結構設計與研究[J];工業建筑;2010年11期
8 張文元;于海豐;張耀春;孫雨宋;;鉸接中心支撐鋼框架體系結構設計研究[J];工業建筑;2009年07期
9 楊俊芬;顧強;萬紅;彭奕亮;;人字形中心支撐鋼框架靜力推覆試驗與有限元分析[J];西安建筑科技大學學報(自然科學版);2010年05期
10 徐建超;;地震作用下鋼框架與中心支撐鋼框架的對比研究[J];佳木斯大學學報(自然科學版);2011年01期
相關會議論文 前6條
1 丁玉坤;于海豐;張文元;孫雨宋;張耀春;;防屈曲和特殊中心支撐鋼框架結構抗震性能分析[A];第17屆全國結構工程學術會議論文集(第Ⅲ冊)[C];2008年
2 李玉榮;王濤;中島正愛;;中心支撐-框架結構設計新方法[A];防振減災工程理論與實踐新進展(紀念汶川地震一周年)——第四屆全國防震減災工程學術研討會會議論文集[C];2009年
3 周青;王偉;陳以一;;梁貫通式中心支撐鋼框架靜力和動力彈塑性分析[A];鋼結構工程研究(九)——中國鋼結構協會結構穩定與疲勞分會第13屆(ISSF-2012)學術交流會暨教學研討會論文集[C];2012年
4 石鑫;李博;逯鵬;;基于AISC341規范對中心支撐框架體系淺析[A];2014年全國鋼結構設計與施工學術會議論文集[C];2014年
5 王帥;;帶大懸挑中庭的鋼框架-中心支撐結構設計[A];第四屆全國建筑結構技術交流會論文集(上)[C];2013年
6 董志騫;李鋼;李宏男;;基于IDA的鋼框架-中心支撐體系參數研究[A];第23屆全國結構工程學術會議論文集(第Ⅲ冊)[C];2014年
相關重要報紙文章 前1條
1 “文字藝術監理師”、文字創意師、獨立藝術策劃人 黃胤然;亦真亦幻《幻茶謎經》[N];中國經營報;2014年
相關博士學位論文 前2條
1 于海豐;焊接工字形鋼支撐及中心支撐鋼框架抗震性能研究[D];哈爾濱工業大學;2010年
2 楊俊芬;中心支撐鋼框架的結構影響系數和位移放大系數研究[D];西安建筑科技大學;2009年
相關碩士學位論文 前10條
1 馮秋元;鋼框架支撐結構體系抗震性能比較分析[D];內蒙古工業大學;2015年
2 麥浩;板式連接中心支撐鋼框架結構的抗震性能研究[D];哈爾濱工業大學;2015年
3 王天涯;拉鏈柱式中心支撐鋼框架基本構件抗震設計方法研究[D];河北科技大學;2014年
4 杭曉晨;人字形中心支撐鋼框架滯回能需求層間分布規律[D];蘇州科技學院;2013年
5 梁守科;鋼框架—跨層X形中心支撐體系動力及低周疲勞性能分析[D];哈爾濱工業大學;2007年
6 尹素媛;帶中心支撐輕鋼結構住宅優化設計[D];河北工程大學;2013年
7 孫躍洲;框架—人字形中心支撐雙重抗側力體系的靜力和動力分析[D];哈爾濱工業大學;2006年
8 李剛;人字形中心支撐鋼框架基于屈服點譜的性態抗震設計方法[D];蘇州科技學院;2011年
9 王鐵軍;鋼框架—中心支撐雙重抗側力體系的剪力分配率分析[D];沈陽建筑大學;2011年
10 沈健超;屈服點譜在中心支撐鋼框架結構抗震性能評價中的應用[D];蘇州科技學院;2011年
,本文編號:2418365
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/2418365.html