H形截面鋼構件繞弱軸抗彎承載力
[Abstract]:The bending behavior of H-section steel members around the weak axis is studied, and the relationship between the bending capacity and the ratio of width to thickness of plates is considered. Based on the nonlinear finite element model calibrated experimentally, the bending process of H-section steel members with different flange and web width-thickness ratio around the weak axis is simulated, and the failure mode is analyzed. It is found that for H-section steel members commonly used in engineering, the pre-limit performance is mainly determined by the ratio of flange width to thickness, and there is a significant correlation between the flange and web. Finally, the upper limit value of the ratio of width to thickness of H-section steel members is given when bending around weak axis, and the ultimate flexural capacity of H-section steel members around weak axis is calculated by effective plastic width calculation method.
【作者單位】: 同濟大學土木工程防災國家重點實驗室;同濟大學土木工程學院;
【基金】:國家自然科學基金重點項目(51038008)
【分類號】:TU392.1
【共引文獻】
相關期刊論文 前4條
1 牛立;程欣;陳以一;;H形鋼構件雙軸壓彎滯回試驗的設計和實現[J];鋼結構;2014年03期
2 程欣;陳以一;;考慮板件相關作用的H形截面壓彎鋼構件抗彎承載力[J];工程力學;2015年03期
3 陳以一;程欣;賀修樟;;薄柔截面構件屈曲鉸及鋼框架破壞機構分析[J];建筑結構學報;2014年04期
4 陳素文;陸志立;李國強;韋明;王彥博;陳星;;Q690D高強鋼焊接截面柱低周反復加載試驗研究[J];建筑結構學報;2014年12期
相關會議論文 前1條
1 陸志立;陳素文;李國強;王彥博;;Q690D高強鋼焊接H形截面柱低周反復加載試驗研究[A];'2013中國鋼結構行業大會論文集[C];2013年
相關博士學位論文 前1條
1 付波;板件延性系數和面向抗震設計的鋼截面分類[D];浙江大學;2014年
【相似文獻】
相關期刊論文 前10條
1 張棟;劉清;劉耘;;圓中空夾層鋼管混凝土抗彎承載力分析[J];低溫建筑技術;2012年12期
2 石永久;李秋U,
本文編號:2414432
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/2414432.html