樓板剛度對框—剪結構協同作用的影響分析
[Abstract]:Under the action of horizontal load, considering the finite stiffness in floor plane, the floor will deform in its own plane, which results in a great difference between the horizontal shear force distribution of the anti-lateral force member and the calculation based on the rigidity of floor slab. Especially for high-rise structures with transfer layer, due to the discontinuity of vertical anti-lateral force members, the floor bears a large shear force in the redistribution of the internal force of the structure, which will produce obvious in-plane deformation. In this paper, the shear force variation of frame columns with floor stiffness and frame shear structure is studied. On the basis of summarizing the present research situation of high-rise structure with transfer floor when considering the deformation of floor slab and the technical regulations of concrete structure of high-rise building in order to ensure the rigidity of floor slab, the paper summarizes the relevant regulations made on the transfer floor slab. Combined with the calculation of shear stiffness of floor, the main factors affecting the stiffness of floor in plane are summarized. By means of PKPM finite element program, by changing the ratio of length to width and the arrangement of floor opening, different comparative analysis models are established to study the influence of the variation of floor opening on the plane stiffness of floor and its influence law. The change and regularity of horizontal shear force of frame column and shear wall during floor deformation are analyzed. The results show that the shear force of frame-column in frame-shear structure increases rapidly with the increase of in-plane deformation. At the same time, reducing the distance between shear walls and increasing the number of floor shear walls is the most effective means to control the deformation in floor plane. The in-plane deformation of the transfer floor and its upper and lower adjacent floors has a decisive effect on the calculation results of the column shear force of the frame-shear structure under two different assumptions.
【學位授予單位】:河北工程大學
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU973.16
【相似文獻】
相關期刊論文 前10條
1 鐘振宇;;關于建筑結構樓板最小厚度確定的探討[J];建筑技術開發;2010年07期
2 余志偉;;世博文化中心主體結構設計與分析[J];建筑結構學報;2010年05期
3 張學亮;;結構空間分析程序應用中的若干問題[J];山西建筑;2007年08期
4 余志偉;朱瑩;花更生;周建龍;;上海世博演藝中心上部主體結構工程設計[J];建筑結構;2009年S1期
5 徐進;姚大鵬;楊佳;;淺談現澆混凝土空心樓板結構設計[J];建設科技;2007年Z1期
6 趙挺生,方東平,顧祥林,張譽;施工期現澆鋼筋混凝土結構的受力特性[J];工程力學;2004年02期
7 王世村;;支付寶總部B塔樓結構設計[J];鋼結構;2013年11期
8 黃健;婁宇;王慶揚;;多層體育健身場館樓蓋系統的舒適度設計[J];建筑結構;2008年08期
9 ;[J];;年期
10 ;[J];;年期
相關會議論文 前3條
1 喬清朝;胡欣;;樓板剛度的合理假定和正確應用[A];土木建筑學術文庫(第14卷)[C];2010年
2 包忠有;;關于高層建筑樓板剛度的若干問題[A];第15屆全國結構工程學術會議論文集(第Ⅰ冊)[C];2006年
3 烏蘭;孟祥良;;高層建筑厚板轉換層的改進方法[A];第九屆全國結構工程學術會議論文集第Ⅱ卷[C];2000年
相關碩士學位論文 前4條
1 羅少華;考慮樓板剛度影響的高層建筑結構地震非線性損傷研究[D];哈爾濱工業大學;2009年
2 曾昭陽;框架結構內力考慮樓板剛度變化影響的有限元分析[D];中南大學;2011年
3 張澤豐;樓板剛度對框—剪結構協同作用的影響分析[D];河北工程大學;2013年
4 孫良鑫;框—剪結構空間二階分析與動力特性分析[D];河北工程大學;2007年
本文編號:2332461
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/2332461.html