【摘要】：隨著人們生活水平的提高，高層建筑的數量越來越多，人們對于電梯的需求日益廣泛，應運而生的電梯監控系統越來越受到廣大廠商和用戶的重視。而在互聯網技術、通信技術高速發達的情況下，電梯監控系統已經不在局限于在固定的計算機監控中心通過PC機同現場總線相連來達到監控，遠程監控和實時監控才能夠保證對電梯信息和故障的更好獲取。在此基礎上，提出了電梯遠程監控系統。電梯遠程監控系統的功能是維保人員、生產廠商對運行在大型住宅區域的電梯進行遠程監控，獲取電梯的運行狀態數據、故障信息，從而及時發現故障，，分析和排除故障。 本文根據電梯遠程監控系統的實際需求，分析了通訊系統存在的問題，并結合了CAN總線技術和工業以太網技術，提出了通訊系統的整體方案。該方案主要需要實現CAN總線接入Internet的功能。 本文以LPC2368微控制器為核心，與CAN通信模塊和以太網控制模塊一起構建了硬件系統。然后，對系統軟件通信進行了詳細設計。主要實現了底層的設備驅動、實現TCP/IP協議，從而建立一條完整的數據通路。根據數據通信存在的問題，采用不斷發生心跳包的方式保持通信系統的可靠性，最終實現了電梯采集設備通過CAN總線接入Internet，互聯網上的數據中心通過該系統實現對電梯采集設備的訪問，達到雙向通信的目的。
[Abstract]:With the improvement of people's living standards, the number of high-rise buildings is increasing, and the demand for elevator is becoming more and more extensive. The elevator monitoring system has been paid more and more attention by the manufacturers and users. In the case of Internet technology and high speed development of communication technology, the elevator monitoring system is not limited to fixed. The computer monitoring center is connected to the field bus by PC to achieve monitoring. Remote monitoring and real-time monitoring can guarantee the better access to information and fault of the elevator. On this basis, the elevator remote monitoring system is proposed. The function of the elevator remote monitoring system is the maintenance personnel, the manufacturer's power to run in the large residential area. The ladder is monitored remotely, and the elevator running state data and fault information are obtained, so as to detect faults in time, analyze and remove faults.
According to the actual demand of the elevator remote monitoring system, this paper analyzes the existing problems of the communication system, and combines the CAN bus technology and the industrial Ethernet technology, and puts forward the overall scheme of the communication system. This scheme mainly needs to realize the function of the CAN bus access to Internet.
In this paper, the hardware system is built with the LPC2368 microcontroller and the CAN communication module and the Ethernet control module. Then, the system software communication is designed in detail. The main realization of the underlying device driver, the implementation of the TCP/IP protocol, and the establishment of a complete data path. When the heartbeat is broken, the reliability of the communication system is maintained. Finally, the elevator acquisition equipment is connected to the Internet through the CAN bus. The data center on the Internet realizes the access to the elevator acquisition equipment through the system, and achieves the purpose of two-way communication.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU857

【參考文獻】

相關期刊論文 前7條

1 朱顯新,黃濤,盧珞先;uC/OS和uClinux的比較[J];單片機與嵌入式系統應用;2004年10期

2 全毅;;電梯遠程監控綜述[J];廣西輕工業;2011年08期

3 趙寧,陳明,何鵬舉;嵌入式操作系統μC/OS-II在ARM上的移植與應用[J];航空計測技術;2004年04期

4 林建民;嵌入式操作系統技術發展趨勢[J];計算機工程;2001年10期

5 程峰;;電梯遠程監控技術及其發展[J];科技信息;2010年18期

6 李瓊;嵌入式TCP/IP協議在ARM上的實現及其應用[J];微計算機應用;2005年06期

7 劉春鳳;張代遠;;uC/OSⅡ下協議棧uIP的移植與應用[J];計算機技術與發展;2012年09期

本文編號：2141128