本文選題：供暖節能 + 變頻技術��； 參考：《東北大學》2013年碩士論文

【摘要】：供熱系統是由熱源、熱能輸送環節、熱用戶等幾部分組成的一個復雜系統,為使熱生產、輸送、分配及使用都處于有序的狀態,則需要在其各個環節進行節能,以提高供熱系統的能源利用率。高等學校由于自身的獨特的特點,節能的模式與其他建筑也有所區別,節能的意義更顯得尤為重要。本文通過對中國醫科大學新校園供暖系統的調查及分析,從供暖中熱源、熱能輸送環節及熱用戶三個節能潛力的環節,結合現代控制技術、計算機技術、通訊技術、微電子技術對三個環節進行了研究,從而對實現高校供暖節能提供了有益的思路。本文在熱源環節主要論述了鍋爐燃燒系統的設計,將燃燒系統分為三個相互聯系的子系統：鏈條爐的給煤調節系統、送風調節系統和引風調節系統。主要論述了變頻技術、氧化鋯測定含氧量技術、PID控制等技術在鍋爐燃燒系統中的應用；在熱源輸送環節論述了管道直埋技術和換熱站系統的設計及換熱機組的控制策略；用戶末端環節,通過在單體樓采暖管道入戶處安裝恒流量調節閥和市內供暖管道安裝手動溫控閥等措施有效的解決了水利失調問題。經過一個采暖季的調試運行,整個系統運行穩定,在滿足用戶需求的基礎上,節約了大量水、電、煤資源。
[Abstract]:The heating system is a complex system composed of heat source, heat transfer link, heat user and so on. In order to make the heat production, transportation, distribution and use in an orderly state, it is necessary to save energy in every link. In order to improve the energy efficiency of the heating system. Because of its unique characteristics, the mode of energy conservation is different from other buildings, and the significance of energy conservation is more important. Based on the investigation and analysis of the new campus heating system of China Medical University, this paper combines modern control technology, computer technology and communication technology from three energy saving potential links of heating source, heat energy transmission link and heat user. The microelectronics technology has carried on the research to the three links, thus has provided the beneficial thought to realize the university heating energy saving. In this paper, the design of boiler combustion system is mainly discussed in the heat source link. The combustion system is divided into three interrelated subsystems: the coal supply regulation system of chain furnace, the air supply regulation system and the air intake regulation system. This paper mainly discusses the application of frequency conversion technology, zirconia determination of oxygen content technology and pid control in boiler combustion system, discusses the design of pipeline direct burying technology and heat transfer station system and the control strategy of heat exchanger unit in heat source transportation. By installing constant flow regulating valve in the heating pipe of single building and manual temperature control valve in the heating pipe of the city, the imbalance of water conservancy is effectively solved. After a heating season, the whole system runs stably and saves a lot of water, electricity and coal resources on the basis of meeting the needs of users.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU832

【參考文獻】

相關期刊論文 前5條

1 趙乃波;王立峰;鐵軍;樊生文;;校園供熱節能控制系統研究與開發[J];工業控制計算機;2008年02期

2 裘旭東;徐健豐;;基于PLC的XA62W型萬能升降臺銑床的技術改造[J];煤礦機械;2007年12期

3 劉法治,趙明富;模糊控制技術在高樓恒壓供水系統中的應用[J];微計算機信息;2005年09期

4 楊智,明麗萍,呂雪艷;21世紀燃?xì)忮仩t在中國的發展前景[J];鍋爐制造;2001年02期

5 李明,徐向東;用容錯技術提高鍋爐控制系統的可靠性[J];清華大學學報(自然科學版);1999年03期

相關碩士學位論文 前1條

1 陳家潤;基于無線傳感器網絡的數據采集系統[D];南京理工大學;2010年

，

本文編號：2034319