加氣混凝土砌塊填充墻裂縫成因及防裂措施
本文選題:混凝土砌塊 + 裂縫; 參考:《青島理工大學》2013年碩士論文
【摘要】:建筑砌塊是現代建筑工程不可缺少的材料,其經由現代工藝,由各種非粘土材料制成,F(xiàn)在主要使用的建筑砌塊主要有混凝土砌塊、無熟料水泥煤渣混凝土砌塊、加氣混凝土砌塊、輕集料混凝土砌塊、蒸氣養護的粉煤灰硅酸鹽砌塊等。隨著現代建筑業的不斷發展和對建筑速度、質量要求的提高,建筑砌塊具有越來越重要的意義和作用。加氣混凝土砌塊是現在建筑業經過經驗積累和技術加工而開發的一種適應社會經濟持續發展的新型墻體材料,被廣泛用作非承重內外墻體。 本文主要研究加氣混凝土砌塊施工后不同部位產生裂縫的情況,分析其變形特性以及施工工藝對加氣混凝土砌塊墻體穩定性的影響。通過優化加氣混凝土砌塊施工工藝,進一步規范加氣混凝土砌塊施工質量控制,探求加氣混凝土砌塊填充墻裂縫產生的成因,為加氣混凝土砌塊的推廣和應用提供條件。并根據我公司與青島理工大學合作進行具體實驗所得到的相關數據,提出相應的解決裂縫產生的措施。首先,本文通過對我公司施工的若干個在建項目進行調研,了解設計要求、施工工序及工藝措施,指出各工程施工中存在的缺陷,找出造成加氣混凝土砌塊填充墻產生裂縫的部位,分析加氣混凝土砌塊填充墻產生裂縫的原因。 課題結合調查結果從加氣混凝土墻體裂縫可能產生的原因入手,聯合青島理工大學實驗室對本次試驗所用的蒸壓加氣混凝土砌塊及其墻體進行物理力學性能試驗,著重研究了加氣混凝土砌塊的出廠齡期、溫度、濕度、含水率、受潮后的二次變形以及抹灰砂漿、砌筑砂漿等對加氣混凝土砌塊及墻體變形的影響。結合調查結果和實驗測試結果,提出相應的墻體防裂設計構造措施和施工工藝措施,并對其經濟成本的貢獻性進行分析。
[Abstract]:Building block is an indispensable material in modern building engineering. It is made of various non-clay materials through modern technology. At present, the main building blocks used are concrete blocks, cement cinder concrete blocks without clinker, aerated concrete blocks, lightweight aggregate concrete blocks, steam cured fly ash silicate blocks and so on. With the continuous development of modern construction industry and the improvement of construction speed and quality requirements, building blocks have more and more important significance and function. Aerated concrete block is a new type of wall material developed by the construction industry through experience accumulation and technical processing. It is widely used as non-load-bearing internal and external wall. This paper mainly studies the situation of cracks in different parts of aerated concrete block after construction, analyzes its deformation characteristics and the influence of construction technology on the stability of aerated concrete block wall. Through optimizing the construction technology of aerated concrete block, the construction quality control of aerated concrete block is further standardized, and the causes of cracks in filled wall of aerated concrete block are explored, which provides conditions for the popularization and application of aerated concrete block. According to the relevant data obtained by the cooperation of Qingdao University of Technology and our company, the corresponding measures to solve the cracks are put forward. First of all, through the investigation and investigation of several projects under construction in our company, the design requirements, construction procedures and technological measures are understood, and the defects in the construction of various projects are pointed out. Find out the position of crack in aerated concrete block filling wall, and analyze the reason of crack in aerated concrete block filling wall. Based on the investigation results and the possible causes of cracks in the aerated concrete wall, the physical and mechanical properties of the autoclaved aerated concrete block and its wall used in this test are tested in conjunction with the laboratory of Qingdao University of Technology. The influences of age, temperature, humidity, moisture content, secondary deformation after moisture, plastering mortar and masonry mortar on the deformation of aerated concrete block and wall are studied emphatically. Combined with the results of investigation and test, the paper puts forward the corresponding design and construction measures of wall crack prevention, and analyzes the contribution of its economic cost.
【學位授予單位】:青島理工大學
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU754;TU765
【相似文獻】
相關期刊論文 前10條
1 劉紀章;;加氣混凝土坯體硬度測定計[J];建筑節能;1983年02期
2 ;全國加氣混凝土工藝技術討論會征集論文[J];建筑節能;1984年02期
3 顧同曾;;抹灰對加氣混凝土墻面含濕平衡的影響[J];建筑節能;1984年06期
4 方承仕;;加氣混凝土中鋼筋防腐蝕的試驗方法(國際建筑材料與構件研究試驗所聯合會制定)[J];建筑節能;1985年05期
5 周天承,李進;摻高聚物的粉煤灰加氣混凝土的研制[J];安徽機電學院學報;2001年01期
6 ;加氣混凝土分體流水簡易切割機組正在研制中[J];房材與應用;1978年02期
7 (钅榮);;南通市加氣混凝土出口工作打開新局面[J];建筑節能;1984年03期
8 杜云堯;;廢漿返磨制備加氣混凝土新工藝通過市級鑒定[J];磚瓦世界;1988年03期
9 王永禎;蘇丁人;;加氣混凝土建筑體系研討會在鞍山市召開[J];粉煤灰綜合利用;1991年02期
10 趙靜安,樓正耕;加氣混凝土生產簡介[J];四川水力發電;1996年01期
相關會議論文 前10條
1 謝才高;;加氣混凝土的產品質量保證與節能新工藝初探[A];現代砌體結構——2000年全國砌體結構學術會議論文集[C];2000年
2 陳國銀;趙琴;;加氣混凝土施工中存在的問題與預防措施[A];土木建筑學術文庫(第10卷)[C];2008年
3 鄭力;陳香利;;加氣混凝土施工中存在的問題與預防措施[A];河南省建筑業行業優秀論文集(2007)[C];2007年
4 封海波;吳敬龍;;加氣混凝土專用界面劑研制及性能研究[A];聚羧酸系高性能減水劑及其應用技術研討會論文集[C];2008年
5 阮鳳芝;賴超;;粉刷石膏一加氣混凝土內墻抹灰工法[A];土木建筑學術文庫(第10卷)[C];2008年
6 阮鳳芝;賴超;;粉刷石膏—加氣混凝土內墻抹灰工法[A];土木建筑學術文庫(第9卷)[C];2008年
7 曹欣;熊仲明;;加氣混凝土砌塊墻體裂縫機理分析及其防治措施[A];砌體結構理論與新型墻材應用[C];2007年
8 肖群芳;蔡魯宏;;加氣混凝土在外墻外保溫體系中的應用[A];蒸壓加氣混凝土砌塊砌體結構研究[C];2010年
9 鄧衛東;;加氣混凝土砌體施工質量控制[A];河南省土木建筑學會2009年學術大會論文集[C];2009年
10 劉燕;程蓮清;;加氣混凝土砌塊墻體裂縫的防治措施[A];土木建筑學術文庫(第13卷)[C];2010年
相關重要報紙文章 前10條
1 中國加氣混凝土協會;發展中的加氣混凝土工業[N];中國建材報;2011年
2 羅暉;加氣混凝土不該受冷落[N];科技日報;2004年
3 濤生;專家呼吁:加氣混凝土不該受冷落[N];中國建設報;2004年
4 汪紅蕾;加氣混凝土推廣緣何受阻?[N];中華建筑報;2004年
5 ;加氣混凝土不該受冷落[N];中國石油報;2004年
6 本報記者 劉志中;一半是效益 一半是責任[N];中華建筑報;2005年
7 上海愛迪技術發展有限公司 余春冠;加氣混凝土應用常見問題的解決與預防[N];中華建筑報;2004年
8 王薔;加氣混凝土:值得關注的新型墻材[N];中國建材報;2004年
9 小朱;加氣混凝土項目試生產成功[N];中國貿易報;2001年
10 常州建材研究設計所 姜勇;發展加氣混凝土應重視的問題[N];中國建材報;2005年
相關博士學位論文 前3條
1 應姍姍;加氣混凝土的納米碳酸鈣改性及高鋁質加氣混凝土的制備[D];浙江大學;2014年
2 彭軍芝;蒸壓加氣混凝土中孔的形成、特征及對性能的影響研究[D];重慶大學;2011年
3 任鵬;墻體材料濕脹實驗方法研究與應用[D];華南理工大學;2011年
相關碩士學位論文 前10條
1 姜輝;脫硫石油焦渣加氣混凝土的耐久性研究[D];青島理工大學;2013年
2 姜成名;超輕保溫裝飾加氣混凝土板的研制與表征[D];哈爾濱工業大學;2013年
3 李杰;磷尾礦加氣混凝土的制備及其性能分析[D];武漢理工大學;2011年
4 樊峻;高性能低密度加氣混凝土的研究[D];湖南大學;2013年
5 李海洲;加氣混凝土墻體收縮、開裂及空鼓的研究[D];浙江大學;2011年
6 袁譽飛;外墻用輕質高強節能保溫加氣混凝土的研制[D];華南理工大學;2011年
7 孫懿t,
本文編號:1990758
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/1990758.html