本文選題：RS-485通信網絡 + 智能建筑��； 參考：《浙江大學》2013年碩士論文

【摘要】：大型樓宇建筑內設備種類繁多、數目巨大、分布較為分散,傳統的單層通信網絡不能很好地進行數據通信和信息交換,因此,本文以某大型綠色智能樓宇設備自控系統的實現為背景,通過分析樓內照明、冷熱源調節設備、空調處理設備、給排水等設備的監控需求,給出了大型樓宇自控系統實現的難點與相對措施,設計了基于雙層結構RS-485通信網絡的樓宇設備自控系統,主要內容包括：(1)通過對各類現場總線網絡包括RS-232、RS-422、RS-485的串行通信技術的分析與比較,提出適合本大型樓宇設備自控系統的通信網絡與通信協議；(2)分析比較了不同平臺下串行通信網絡的實現技術,確定了本樓宇自控系統的實現方法；(3)對照明設備、冷熱源控制設備、空調設備、給排水設備等設備進行了控制需求分析,建立了串行通信網絡；(4)設計了系統控制軟件,包括：主體設計、數據庫設計和界面設計。本文提出的基于雙層RS-485串行通信的樓宇設備自控系統運行結果表明,該實現方法實時性好,可靠性高。
[Abstract]:There are many kinds of equipments in large buildings, the number is huge and the distribution is scattered. The traditional single-layer communication network can not carry on the data communication and information exchange well, therefore, the traditional single-layer communication network can not carry on the data communication and the information exchange well. Based on the realization of automatic control system for a large green intelligent building, this paper analyzes the monitoring requirements of lighting, cooling and heat source regulating equipment, air conditioning equipment, water supply and drainage equipment, etc. The difficulties and relative measures in the realization of large building automatic control system are given, and the building equipment automatic control system based on double-layer structure RS-485 communication network is designed. The main contents include: (1) through the analysis and comparison of the serial communication technology of various fieldbus networks, including RS-232, RS-422 and RS-485, This paper puts forward a communication network and a communication protocol suitable for the automatic control system of this large building equipment. It analyzes and compares the realization technology of the serial communication network under different platforms, and determines the realization method of the building automatic control system. The control requirements of cold and heat source control equipment, air conditioning equipment, water supply and sewerage equipment were analyzed. The serial communication network was established. The system control software was designed, including main body design, database design and interface design. The running results of building equipment automatic control system based on double-layer RS-485 serial communication show that this method has good real-time performance and high reliability.
【學位授予單位】：浙江大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU855;TP273

【參考文獻】

相關期刊論文 前2條

1 ;發展節能與綠色建筑刻不容緩——建設部副部長仇保興在國務院新聞發布會上指出[J];城市開發;2005年03期

2 王戰軍;沈明;;基于Matlab GUI的串口通信編程實現[J];現代電子技術;2010年09期

，

本文編號：1774619