本文選題：塑料模板　切入點：數字化模板支撐體系　出處：《青島理工大學》2013年碩士論文　論文類型：學位論文

【摘要】：隨著國家工程建設的不斷發展，各種功能和不同特點的新型模板和模板支撐體系不斷出現，如常見的塑料模板和數字化模板支撐系統等。塑料模板表面平整，重量輕，耐腐蝕性耐水性強，可塑性強，周轉次數高；數字化模板支撐體系采用高性能冷軋鋼，力學性能好，耐腐蝕度較大，，安裝拆卸方便，在工程中得到了廣泛的推廣使用。但是對新型模板的支承設計的研究沒有得到充分的重視，當前仍然采用建筑施工模板安全技術規范中的三跨連續梁模型進行模板的支承分析，因此本文對塑料模板在雙線性支承條件下的支承布置采用雙向受彎板模型計算分析，并編制了便于工程應用的支承分析軟件，為支承布置分析提供了一種新的方法，并且對模板支承研究提供了一定的參考依據。 本文的研究內容主要由以下幾個方面： （1）通過對塑料模板和數字化模板支撐體系的特點進行研究，通過一定的假設條件，得到雙向受彎板模型下，多向線性支承條件的塑料模板的支承分析模型，為進行數值分析研究提供基礎； （2）對模板的支承分析模型按照有限元分析的步驟，選取合適的分析單元類型，進行網格劃分、單元分析、整體分析和求解位移內力應力的理論分析，得到進行數值分析編程的基本算法表示； （3）根據數值分析的算法，采用VC語言編寫數值分析的程序函數，并根據控制條件編寫優化命令程序； （4）利用程序函數，結合MFC應用程序框架在VC++6.0編程環境下編制模板支承分析布置的工程軟件，對工程案例進行軟件分析；采用有限元數值分析軟件ANSYS10.0，利用SHELL63單元，對軟件分析結果進行數值分析，驗證軟件分析的精確性和可靠性；對兩種計算模型的計算結果進行對比，分析雙向受彎板計算模型的特點和適用性。
[Abstract]:With the continuous development of national engineering construction, various functions and different characteristics of new formwork and formwork support system are emerging, such as common plastic template and digital template support system, etc. The plastic template has a flat surface, light weight, etc. High corrosion resistance, high plasticity, high turnover times, high performance cold rolled steel with high performance, good mechanical properties, high corrosion resistance, convenient installation and disassembly, It has been widely used in engineering. However, the research on supporting design of new formwork has not been paid enough attention to. At present, the three-span continuous beam model in the safety technical specification of building construction formwork is still used to carry out the support analysis of the formwork. In this paper, bidirectional bending plate model is used to calculate and analyze the support arrangement of plastic formwork under bilinear support condition, and a supporting analysis software is developed for engineering application, which provides a new method for the analysis of support arrangement. It also provides a certain reference for the research of formwork support. The main contents of this paper are as follows:. 1) by studying the characteristics of plastic formwork and digital formwork support system, and under certain hypothetical conditions, the support analysis model of plastic formwork with multi-direction linear supporting conditions under bidirectional bending plate model is obtained. To provide a foundation for numerical analysis; 2) according to the steps of finite element analysis, the supporting analysis model of the template is selected, the appropriate analysis element type is selected, the mesh division, the element analysis, the whole analysis and the theoretical analysis to solve the internal force and stress of displacement are carried out. The basic algorithm representation of numerical analysis programming is obtained. According to the algorithm of numerical analysis, the program function of numerical analysis is compiled by VC language, and the optimized command program is compiled according to the control condition. 4) using program function and combining with MFC application program framework in VC 6.0 programming environment to compile the engineering software of formwork support analysis arrangement, software analysis of engineering case, finite element numerical analysis software ANSYS10.0 and SHELL63 unit, Numerical analysis is carried out to verify the accuracy and reliability of the software analysis, and the characteristics and applicability of the bidirectional bending plate model are analyzed by comparing the results of the two kinds of calculation models.
【學位授予單位】：青島理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP311.5;TU755.2

【參考文獻】

相關期刊論文 前10條

1 王俊富;李森;苗吉軍;劉延春;周巖;;數字化鋼性模板支撐組合結構施工技術試驗研究[J];工業建筑;2011年S1期

2 杜平安;有限元網格劃分的基本原則[J];機械設計與制造;2000年01期

3 顧貞兵;;數字化鋼性支撐體系在混凝土結構模板中應用[J];山西建筑;2011年02期

4 湯少強;;模板工程在鋼筋混凝土施工中的合理應用[J];科技風;2008年02期

5 夏劍平;;數字化鋼性建筑模板支撐系統[J];科技致富向?qū)?2011年09期

6 王剛;張林;;試論模板工程的重要性及其發展趨勢[J];民營科技;2011年03期

7 糜嘉平;;日本模板和腳手架技術的現狀及發展方向[J];建筑技術;2011年11期

8 劉鵬;;塑料模板的開發與應用[J];施工技術;2007年02期

9 糜嘉平;;國外塑料模板的發展概況[J];施工技術;2007年11期

10 糜嘉平;;我國塑料模板的發展與前景[J];施工技術;2007年11期

本文編號：1634797