【摘要】：為了實現全場多尺度變形測量,利用三軸電動平移臺、4臺高分辨率相機、3個不同放大倍數的遠心鏡頭和1個顯微鏡頭組成了多尺度二維數字圖像相關測量系統,采用該測量裝置可實現從宏觀到微觀尺度的變形測量.實驗結果表明:通過置于高精度三維可控平移臺上的二維數字圖像相關測量裝置,可實現任意微區的跟蹤觀測.經過標定的測量系統可以對觀測區域?qū)崿F(xiàn)測量尺度的任意切換,達到所需要的測量精度及觀測要求.最后對貝氏體鋼腐蝕后的表面紋理進行了數字圖像相關測量.該測量系統對于裂紋尖端力學行為的研究具有很好的應用前景.
[Abstract]:In order to realize the full-field multi-scale deformation measurement, a multi-scale two-dimensional digital image correlation measurement system is made up of a three-axis electric translation platform, four high-resolution cameras, three telecentric lenses with different magnification and a microscope head. The measurement device can be used to measure deformation from macro to micro scale. The experimental results show that the tracking and observation of any micro-region can be realized by a two-dimensional digital image correlation measurement device placed on a high-precision three-dimensional controllable translation platform. The calibrated measurement system can achieve arbitrary scale switching in the observation area, and achieve the required measurement accuracy and observation requirements. Finally, the surface texture of bainitic steel after corrosion was measured by digital image correlation. The system has a good application prospect for studying the mechanical behavior of crack tip.
【作者單位】： 東南大學江蘇省工程力學分析重點實驗室;
【基金】：國家自然科學基金資助項目(11272089,11327201,11532005) “十二五”國家科技支撐計劃資助項目(2014BAK11B04)
【分類號】：TP391.41

【相似文獻】

相關期刊論文 前10條

1 王玨;;數字圖像質量解析[J];美術大觀;2010年01期

2 王剛;;數字圖像的快速與科學識別研究[J];藝術與設計(理論);2012年12期

3 黃];楊h接，

本文編號：2308435