本文選題：青銅器　切入點：圖像碎片　出處：《西安電子科技大學學報》2016年06期 　論文類型：期刊論文

【摘要】：針對青銅器小碎片人工拼接復原耗時費力的問題,提出了一種基于曲率特征的青銅器小碎片虛擬拼接方法.首先分別提取青銅器小碎片的輪廓,并在平滑處理提取結果的基礎上計算輪廓的曲率.其次以曲率的局部極大值點作候選角點,再根據支撐域消除圓角點和偽角點.然后計算相鄰兩角點間的弦長,以弦長作為特征序列進行匹配.最后在平移旋轉過程中利用向量模的不變性進行匹配精化處理,得到青銅器小碎片的最終拼接結果.實驗結果表明,該方法能夠有效地提高拼接效率和匹配效果.
[Abstract]:Aiming at the time-consuming problem of manual splicing and restoration of small pieces of bronze, a method of virtual splicing of small pieces of bronze based on curvature characteristics is proposed. Firstly, the contours of small fragments of bronze are extracted separately. The curvature of the contour is calculated on the basis of the result of smoothing processing. Secondly, the local maximum of curvature is used as the candidate corner point, then the circular corner and pseudo-corner are eliminated according to the support region, and the chord length between the adjacent two corners is calculated. The string length is used as the feature sequence to match. Finally, the invariance of vector mode is used to refine the matching in the process of translation and rotation, and the final splicing results of small pieces of bronze ware are obtained. The experimental results show that, This method can effectively improve the efficiency of stitching and matching effect.
【作者單位】： 中北大學計算機與控制工程學院;山西博物院文物保護中心;
【基金】：山西省自然科學基金資助項目(2013011017-4) 山西省重點研發計劃(指南)資助項目(201603D321128) 山西省研究生教育創新資助項目(2016SY051)
【分類號】：K876.41;TP391.41

【相似文獻】

相關期刊論文 前7條

1 李思琪;;有趣的小實驗[J];文學與人生;2006年18期

2 張玉庭;趙兵儒;;花瓶與木桶[J];科學大觀園;2002年05期

3 張玉庭;;瓶瓶罐罐與木桶[J];散文;2002年02期

4 陶萬偉;“打碎了”的聰明[J];思維與智慧;2002年10期

5 汩羅江;寂寞時節 幸�；ㄩ_(kāi)[J];新青年(朋友);2005年01期

6 ;笑聞聯播[J];數學大王(中年級版);2007年01期

7 ;[J];;年期

，

本文編號：1640420