本文選題：水深測量　切入點：單波束　出處：《天津大學》2016年碩士論文　論文類型：學位論文

【摘要】：本文以C#為基本程序語言,GDI+圖形圖像接口、netDxf類庫、Office的C#開發接口等為基礎,實現在水深數據成圖時圖形與數據的交互操作、矢量圖形的編輯寫入、Office報表的編制輸出等。使得該系統可視化效果良好、操作靈活多。主要針對單波束水深測量外業采集數據的后處理軟件進行編寫,在對單波束數據進行綜合處理時,不僅包括數據編輯、水位改正等基本數據處理功能,還擴展數據文件的結構化管理、坐標轉換、批量繪圖、質量檢查與精度統計等功能,實現了簡潔化、集成化,使得技術人員在工作中更為便捷。同時開發軟件過程圍繞單波束水深測量流程,針對各個環節開展針對性功能模塊的開發,在實現現有商業軟件的基本功能外,增加了大量實用的工程實踐應用功能。主要包括數據的預檢查與預處理、符合行業技術規范的自動化質量檢查與精度統計、大量數據文件的批量繪圖、不同格式的水深數據文件的通用處理等。彌補了市場上各種處理軟件格式不兼容、功能不全面的不足。本文完成了系統的前期調研、需求分析、界面與功能設計,并通過實質性功能代碼的編寫,最終實現了整個單波束綜合數據處理系統的設計與開發。
[Abstract]:In this paper, based on the C # development interface of C # and GDI graphics and image interface, we realize the interactive operation of graph and data when the water depth data is drawn, which is based on the C # development interface of the class library of netDxf and Office. The editing of vector graphics is written into the compilation and output of Office report forms and so on. The visualization effect of the system is good and the operation is much more flexible. It is mainly written for the post-processing software of the data collected in the field of single-beam bathymetry. In the integrated processing of single beam data, it not only includes the basic data processing functions such as data editing, water level correction and so on, but also extends the functions of structured management of data files, coordinate conversion, batch drawing, quality inspection and precision statistics, etc. At the same time, the software development process revolves around the single beam water depth measurement flow, aiming at each link to carry out the development of the targeted function module. In addition to the basic functions of the existing commercial software, a large number of practical engineering practical application functions have been added, mainly including pre-inspection and preprocessing of data, automatic quality inspection and precision statistics in accordance with the technical specifications of the industry. The mass drawing of a large number of data files and the general processing of water depth data files in different formats have made up for the incompatibility of all kinds of processing software formats in the market and the incomprehensive functions. This paper has completed the preliminary investigation and demand analysis of the system. Interface and function design, and through the preparation of substantive functional code, the design and development of the whole single beam integrated data processing system is finally realized.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP311.52

【參考文獻】

相關期刊論文 前10條

1 杜國元;黃金發;沈理;;無姿態傳感器下RTK三維水深測量方法[J];中國水運;2015年11期

2 馬丁;;多波束測深系統在大浪淀水庫庫容測量中的應用[J];水利信息化;2014年05期

3 田鵬;姜印平;;MATLAB與C#混合編程在ASP.NET數值計算中的分析與實現[J];天津理工大學學報;2014年04期

4 楊甫權;白廣明;;北引渠首水下基坑開挖快速檢測技術[J];水利科技與經濟;2014年07期

5 饒光勇;陳俊彪;;多波速測深系統和側掃聲吶系統在堤圍險段水下地形變化監測中的應用[J];廣東水利水電;2014年06期

6 李志剛;陳祥余;李海森;鄧平;;海底地基形位測量儀研制與海上試驗研究[J];海洋工程;2014年02期

7 徐雪戰;孟祥瑞;何葉榮;趙光明;王向前;;基于三維可視化與虛擬仿真技術的綜采工作面生產仿真研究[J];中國安全生產科學技術;2014年01期

8 鄒學海;吳柏宣;王衛東;;單波束水深測量的定點取樣技術實現[J];海洋測繪;2014年01期

9 呂紅濤;;測深儀在京杭運河穿越測量中的應用[J];中國水運(下半月);2014年01期

10 吳炳昭;陸秀平;吳太旗;李凱鋒;黃賢源;;GPS無驗潮水深測量系統的用戶端檢測[J];海洋測繪;2012年02期

，

本文編號：1625759