發布時間：2019-06-10 08:43

【摘要】：撥爪式撥料輥是有機肥(包括廄肥)撒施機關鍵部件。為此,根據有機肥撒施機整機設計目標,對撥料輥進行了設計,并計算優化了撥爪式撥料輥撥爪的折彎角、排列間距及排列方式,得到最佳設計參數。通過ANSYS Workbench對撥料輥進行模態分析,結果表明:在正常工作下?lián)芰陷伈粫l(fā)生共振,符合設計要求。對整機進行試驗驗證,有機肥拋撒幅寬為5m,拋撒均勻性橫向變異系數為15.4%,縱向變異系數為8.9%,均滿足設計的要求。
[Abstract]:Claw dialing roller is the key component of organic fertilizer (including manure). For this reason, according to the design goal of the organic fertilizer dispenser, the feeding roller is designed, and the bending angle, arrangement spacing and arrangement mode of the claw type feeding roller are calculated and optimized, and the optimum design parameters are obtained. The modal analysis of the feeding roller is carried out by ANSYS Workbench. The results show that the feeding roller does not resonate under normal operation and meets the design requirements. The experimental results show that the width of organic fertilizer is 5 m, the transverse coefficient of variation of throwing uniformity is 15.4%, and the longitudinal coefficient of variation is 8.9%, which all meet the requirements of the design.
【作者單位】： 農業部南京農業機械化研究所;江蘇省農業裝備工程技術創新中心;
【基金】：江蘇省農機“三新”工程項目(NJ2015-09)
【分類號】：S224.2

【相似文獻】

相關期刊論文 前1條

1 張鐵軍;;研究生模態分析實驗課中實施創新性教學的實踐與思考[J];東北農業大學學報(社會科學版);2005年01期

，

本文編號：2496326