利用二階攝動方法研究了靜載荷作用下結構線彈性裂紋的彎曲擴展問題、裂紋路徑預測時的應力準則與能量準則之間的關系,并求解出三維靜態應力強度因子.歸納總結出三維線彈性彎曲裂紋擴展的判據,求解出三維線彈性彎曲裂紋擴展過程中的形狀參數.利用Irwin公式計算出三維彎曲裂紋擴展引起的靜態能量釋放速率.研究了具有非均勻斷裂韌性的材料的三維靜態彎曲裂紋.就均勻物質而言,在二階攝動分析理論的框架內,兩種準則指明了相同的三維靜荷載彎曲裂紋擴展路徑.但在具有非均勻斷裂韌度的物質中,能量準則優越于應力準則.對三維靜態彎曲裂紋路徑失穩因素進行了比較和分析,研究了不同初始三維裂紋長度下材料退化與靜施應力或外靜應力之間的臨界關系. 

【文章頁數】：8 頁

【文章目錄】：
0 Introduction
1 Approximate description of a three-dimensional curved crack in a finite body receiving static load
    1.1 Modification of the second order perturbation solution to a three-dimensional curved crack
    1.2 Criterion of the three-dimensional curved static crack unsteady extending
2 Discussion on static crack path criteria
    2.1 Static energy release rate
    2.2 The effects of inhomogeneous distribution of three-dimensional static fracture toughness
3 The three-dimensional curved crack path prediction of brittle fracture in weldment under static load
    3.1 An analytical model of a linear elasticity crack in weldment
    3.2 Three-dimensional static crack path prediction
    3.3 Results and discussions
4 Conclusion


【參考文獻】：
期刊論文
[1]動態載荷作用下焊接點線彈性裂紋的彎曲擴展路徑的預測(英文)[J]. 楊大鵬,張雪艷,趙耀,白玲,趙輝.  船舶力學. 2012(03)
[2]結構裂紋故障振動檢測的小波分析[J]. 張維峰,馮華.  力學與實踐. 2010(01)
[3]管線鋼表面裂紋體的三維斷裂特性和斷裂判據研究[J]. 趙新偉,羅金恒,楊政,張華,張廣利.  機械強度. 2009(04)



本文編號：3706751