【摘要】：基于非結構任意多邊形網格管理體系及束縛滑移技術,針對多介質多次加卸載大變形問題的模擬,發展滑移線開穴算法,并利用金屬碰撞分離模型進行驗證.給出滑移線上的點和網格的開閉穴狀態判別方法及網格開閉情況下滑移線上點的速度計算方法.該滑移計算技術將傳統結構網格的開穴算法推廣到拉氏非結構多邊形網格中,保留拉氏滑移算法無縫連接和較好模擬物質界面的優點,實現了模擬實際問題中物質界面開閉功能.在金屬碰撞分離模型中采用多種網格、不同界面形狀和多介質等條件進行測試,證明了算法的正確性.
[Abstract]:Based on the unstructured arbitrary polygonal grid management system and bound slip technology, the slip line hole opening algorithm is developed for the simulation of multi-medium multiple loading and unloading large deformation problem, and the metal collision separation model is used to verify the algorithm. The discriminant method of the open and closed hole state of the point on the slip line and the velocity calculation method of the point on the slip line under the condition of open and closed grid is given. The slip calculation technique extends the hole opening algorithm of the traditional structural grid to the Lagrangian unstructured polygonal grid, and preserves the advantages of seamless connection of the Lagrangian slip algorithm and good simulation of the material interface. The function of opening and closing the material interface in the simulation of practical problems is realized. In the metal collision separation model, a variety of grid, different interface shapes and multi-media conditions are used to test, and the correctness of the algorithm is proved.
【作者單位】： 北京應用物理與計算數學研究所;
【基金】：國家自然科學基金(11372051) 中國工程物理研究院院長基金(2014-1-042)資助項目
【分類號】：O35
，

本文編號：2478483