【摘要】：為可靠獲取爆炸沖擊波超壓參數,設計一種鋁箔薄膜結構進行實驗。通過控制材料狀態、結構頻率特性等參數,使其滿足一定毀傷準則,建立力學模型對其進行分析。利用激波管裝置對薄膜變形進行標定,并將激波反射載荷轉換為入射壓,采用最小二乘法進行線性擬合,得到薄膜最大變形撓度與激波入射壓峰值之間關系。結果表明,可通過鋁箔薄膜最大變形撓度反映爆炸場中0.05~0.35 MPa范圍內的入射沖擊波超壓,為沖擊波測試工程應用提供新的途徑。
[Abstract]:In order to obtain the explosion shock wave overpressure parameters, an aluminum foil film structure was designed. By controlling the parameters of material state and structure frequency characteristic, the damage criterion is satisfied, and the mechanical model is established to analyze it. The film deformation was calibrated by shock tube device, and the shock wave reflection load was converted into incident pressure. The linear fitting was carried out by using the least square method. The relationship between the maximum deformation deflection of the film and the peak incident pressure of the shock wave was obtained. The results show that the maximum deformation deflection of the aluminum foil film can reflect the overpressure of the incident shock wave in the range of 0. 05 ~ 0. 35 MPa in the explosion field, which provides a new way for the engineering application of shock wave testing.
【作者單位】： 西安近代化學研究所;南京理工大學機械工程學院;
【基金】：國家自然科學基金(11372143)
【分類號】：TJ01;O384

【相似文獻】

相關期刊論文 前2條

1 馬瑞;楊慶山;王曉峰;;基于穩定理論的剪切薄膜屈曲分析[J];力學學報;2014年01期

2 ;[J];;年期

相關博士學位論文 前1條

1 王彬;流固耦合作用的弱耦合算法及風與薄膜結構的耦合分析[D];北京交通大學;2008年

相關碩士學位論文 前1條

1 王樹峰;基于分子動力學的磁盤保護薄膜摩擦學特性研究[D];哈爾濱工業大學;2014年

，

本文編號：2199988